Home › Drivetrain › UA80E (AUTOMATIC TRANSMISSION / TRANSAXLE) › AUTOMATIC TRANSAXLE SYSTEM › from 2020.11
NM37A0E _52 Drivetrain _095687 UA80E AUTOMATIC TRANSMISSION / TRANSAXLE _0449360 AUTOMATIC TRANSAXLE SYSTEM GE GENERAL F

UA80E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A UA80E 8-speed Automatic Transaxle (Direct Shift-8AT) is used on 2WD models.


b.

A straight type shift lever with boot is used.


c.

A multi-mode automatic transmission is used.


d.

A differential pre-torque mechanism is used. Straightline stability and acceleration performance during periods of low load and low differential rotation when the vehicle is being driven normally are ensured.


e.

An ATF warmer (transmission oil cooler) and an ATF cooler (oil cooler assembly) with transmission oil thermostat are provided in the ATF cooling system.


f.

An oil pump with solenoid assembly ensures the oil pressure in order to achieve shock reduction and responsiveness when starting the engine from an idling stop. As a result, a smooth start off is made possible. For details, refer to IDLING STOP CONTROL.



SPECIFICATION


Automatic Transaxle Assembly

*1: Counter gear ratio included

*2: Differential fluid included

*3: The weight shown is the weight of the part fully filled with fluid.

Transaxle Type UA80E
Gear Ratio 1st 5.519
2nd 3.184
3rd 2.050
4th 1.491
5th 1.234
6th 1.000
7th 0.800
8th 0.673
Reverse 4.220
Differential Gear Ratio*1 3.003
Fluid Type Toyota Genuine ATF WS
Fluid Capacity*2 Liters (US qts, Imp. qts) 7.5 (7.9, 6.6)
Weight (Reference)*3 kg (lb) 94.2 (208)

Item Specification
C1 No. 1 Clutch No. of Discs 5
C2 No. 2 Clutch 4
C3 No. 3 Clutch 3
C4 No. 4 Clutch 4
B1 No. 1 Brake 4
B2 No. 2 Brake 5
Front Planetary Gear Unit No. of Front Sun Gear Teeth 42
No. of Inner Pinion Gear Teeth 15
No. of Outer Pinion Gear Teeth 18
No. of Ring Gear Teeth 82
Rear Planetary Gear Unit No. of Middle Sun Gear Teeth 34
No. of Rear Sun Gear Teeth 26
No. of Long Pinion Gear Teeth 18
No. of Short Pinion Gear Teeth 15
No. of Ring Gear Teeth 70
Counter Gear No. of Drive Gear Teeth 52
No. of Driven Gear Teeth 49


Torque Converter Assembly
Torque Converter Assembly Type 3-element, 1-step, 2-phase
Stall Torque Ratio 1.76