Home › Drivetrain › UA80E (AUTOMATIC TRANSMISSION / TRANSAXLE) › SHIFT LOCK SYSTEM › from 2020.11
NM37A0E _52 Drivetrain _095687 UA80E AUTOMATIC TRANSMISSION / TRANSAXLE _0449361 SHIFT LOCK SYSTEM DE DETAILS F

UA80E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LOCK SYSTEM  DETAILS  SHIFT LOCK MECHANISM  


FUNCTION OF MAIN COMPONENTS


Component Function
Shift Lock Control Unit Shift Lock Solenoid Locks the shift lever in P.
P Detection Switch Detects the shift lever in P.
Shift Lock Control ECU Controls the shift lock solenoid based on signals from each switch.
Stop Light Switch Assembly Detects when the brake pedal is depressed.
Engine Switch Detects the switch operation condition.
Certification ECU (Smart Key ECU Assembly) Sends the engine switch signal to the shift lock control ECU.


SYSTEM CONTROL


a.

The shift lock control ECU uses the P detection switch to detect the shift lever position, and receives input signals from the stop light switch assembly and engine switch. Upon receiving these signals, the shift lock control ECU turns on the shift lock solenoid in order to release the shift lock.



FUNCTION


a.

Shift Lock Mechanism

i.

The shift lock mechanism prevents the shift lever from being moved to any position other than P, unless the ignition switch is ON, and the brake pedal is depressed. This mechanism helps to prevent unintentional acceleration.


ii.

A shift lock release button, which manually overrides the shift lock mechanism, is provided.