CONSTRUCTION
By using pig tail type rear coil springs, optimal suspension stroke is ensured.
A low-pressure (N2) gas sealed rear shock absorber assembly is used.
Except Models for Europe
To achieve both body control when driving on smooth roads and good ride comfort when driving on rough roads, a valve which ensures sufficient and responsive damping force at low shock absorber speeds and reduced damping force at high shock absorber speeds is used, resulting in a reduction of large shocks and ensuring stability and high quality ride comfort.
| *1 | Rear Coil Spring | *2 | Oil Seal |
| *3 | Rod Guide Bush | *4 | Absorber Rod |
| *5 | Piston Valve | *6 | Base Valve |
| *7 | Oil | *8 | Low-pressure (N2) Gas |
| *9 | Friction Control Device (FCD) | - | - |
To prevent hazardous conditions, make sure to empty the gas from the rear shock absorber assembly before discarding the low-pressure (N2) gas sealed in the rear shock absorber assembly. For details, refer to the Repair Manual.
A friction control device (FCD) has been adopted, which improves the flat driving feel and reduces vibration in the high frequency range, realizing excellent ride comfort.
| *1 | Absorber Rod | *2 | Oil Seal |
| *3 | Friction Control Device (FCD) | - | - |
Models for Europe
By ensuring appropriate friction characteristics of the sliding parts, the damping force at very low shock absorber speeds has been optimized to ensure both excellent ride comfort and handling stability.
| *1 | Rear Coil Spring | *2 | Oil Seal |
| *3 | Rod Guide Bush | *4 | Absorber Rod |
| *5 | Piston Valve | *6 | Base Valve |
| *7 | Oil | *8 | Low-pressure (N2) Gas |
To prevent hazardous conditions, make sure to empty the gas from the rear shock absorber assembly before discarding the low-pressure (N2) gas sealed in the rear shock absorber assembly. For details, refer to the Repair Manual.