Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM › from 2020.11
NM37A0E _58 Vehicle Interior _088267 DOOR LOCK _0420944 POWER DOOR LOCK CONTROL SYSTEM CO CONTROL F

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  CONTROL  POWER DOOR LOCK CONTROL  


FUNCTION


a.

The power door lock control system has the following functions:

Function Outline

*1: Models for Europe

*2: The system can be set to unlock all the doors after 1 or 2 key-linked unlock operations for the driver side by using the customization function.

*3: Except Australia models

*4: HV Models

*5: Gasoline Models

*6: Although this function is disabled by default, the function can be set via the customization function.

One-motion Open (Driver and Front Passenger Side)*1 When the door is locked, this function enables the door to be unlocked by merely pulling the inside handle lever of the door.
One-motion Open (Driver Door)
Key-linked Lock This function, which is linked with the key cylinder, can lock all the doors when a lock operation is performed.
2-step Unlock*2*6 This function is provided to unlock the driver door when the mechanical key is turned in the key cylinder the first time, and to unlock the remaining doors within 5 seconds when it is turned the second time.
Pressing the unlock button of the electrical key transmitter sub-assembly twice within 5 seconds unlocks all doors after it first unlocks the driver's door.
Manual Unlock Prohibition Function When the doors are all closed and are locked using a key-linked operation, wireless key operation or entry lock operation, unlocking the vehicle using the door control switch is prohibited.
Key Confinement Prevention When the electrical key transmitter sub-assembly is present in the interior detection area, and a door lock operation is performed while the driver door is open, all the doors will be unlocked.
Collision Door Lock Release*3 If the SRS airbag system has been deployed, and the main body ECU (multiplex network body ECU) has detected the signal that is output by the airbag sensor assembly, the main body ECU (multiplex network body ECU) unlocks all the doors.
Shift-linked Automatic Door Lock*3*6 When the conditions listed below are met consecutively, this function causes all the doors to be automatically locked.
·

The ignition switch is turned from off or ACC to ON.

·

The hybrid system is READY.*4

·

The engine is started.*5

·

All the doors are closed.

·

The shift position is changed from P to R, N or D.

·

Any one of the doors is in an unlocked state.


Shift-linked Automatic Door Unlock*3*6 When the ignition switch is turned to ON, and the shift lever is moved to P, all the doors will be automatically unlocked.
·

All doors are closed.

·

Any one of the doors is in an unlocked state.


Driver Door Opening-linked Automatic Door Unlock*3*6 All doors are automatically unlocked when the driver door is opened within 43 seconds of the ignition switch being turned from ON to ACC or off.
Speed-sensitive Automatic Door Lock*3 This function causes all the doors to be automatically locked.
·

Vehicle speed is higher than approximately 20 km/h (12 mph).

·

All the doors are closed.

·

Any of the doors is unlocked.


Customization The on or off setting of some functions and settings can be performed using the GTS or multi-information display. In addition, some functions are not available depending on the specification. For details, refer to the Repair Manual.