CONSTRUCTION
The backup boost converter uses a semiconductor relay. The semiconductor relay also functions as a fuse. When overcurrent is detected, the relay is turned off to protect the circuit.
The backup boost converter supplies battery voltage to help make up for the voltage drop that occurs when the engine is restarted. This prevents the operation of the following equipment from being interrupted due to low battery voltage.
Meter Mirror Sub-assembly*1
Navigation ECU*2
Fog Light Assembly LH
Fog Light Assembly RH
Air Conditioning Control Assembly
No. 2 Air Conditioning Control Assembly
Television Display Assembly*3
Inner Rear View Mirror Assembly
Radio and Display Receiver Assembly
Clearance Warning ECU Assembly
Central Gateway ECU (Network Gateway ECU)
Power Steering ECU with Motor Assembly
Combination Meter Assembly
Millimeter Wave Radar Sensor Assembly
Blind Spot Monitor Sensor LH
Blind Spot Monitor Sensor RH
Skid Control ECU (Brake Actuator Assembly)
Steering Sensor
Oil Pump with Motor Assembly
Center Tray Illumination Light (No. 1 Interior Illumination Light Assembly)*4
Front Passenger Side Tray Illumination Light (No. 1 Interior Illumination Light Assembly)*4
Front Door Ambient Light LH*4
Front Door Ambient Light RH*4
Rear Door Ambient Light LH*4
Rear Door Ambient Light RH*4
*1: Models with headup display system
*2: Models with navigation system
*3: Models with rear seat entertainment system
*4: Models with ambient illumination light
Models with Stereo Component Amplifier Assembly
An external backup boost converter (eco run vehicle converter assembly) is used.
When the audio system is used during idle stop, the external backup boost converter (eco run vehicle converter assembly) compensates for the voltage drop to supplement audio playback by stabilizing the sound quality.