Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM (for Gasoline Model) › from 2020.11
NM37A0E _57 Power Source / Network _086694 NETWORKING _0419117 CAN COMMUNICATION SYSTEM(for Gasoline Model) CO CONTROL F

NETWORKING  CAN COMMUNICATION SYSTEM(for Gasoline Model)  CONTROL  CAN COMMUNICATION CONTROL  


FUNCTION


CAN Connection Components

*1: Models with Toyota safety sense

*2: Models with panoramic view monitor system

*3: Models with telematics transceiver

*4: Models with 8-inch display

*5: Models with seat position memory system

*6: Models with headup display system

*7: Models with 12.3-inch display

*8: Models with stop and start system

*9: Models with panoramic view monitor system or parking assist monitor system

*10: Models with tire pressure warning system

*11: Models with power back door system

Central Gateway ECU (Network Gateway ECU) Forward Recognition Camera*1
Millimeter Wave Radar Sensor Assembly*1 Clearance Warning ECU Assembly
Parking Assist ECU*2 Blind Spot Monitor Sensor LH
Rear Television Camera Assembly*9 ECM
Telematics Transceiver*3 Radio and Display Receiver Assembly*4
4WD ECU Assembly Tire Pressure Warning ECU and Receiver*10
Steering Sensor Power Steering ECU (Rack and Pinion Power Steering Gear Assembly)
Skid Control ECU (Brake Actuator Assembly) Airbag Sensor Assembly
Outer Mirror Control ECU Assembly LH*5 Outer Mirror Control ECU Assembly RH*5
Position Control ECU Assembly LH*5 Position Control ECU Assembly RH*5
Air Conditioning Amplifier Assembly Certification ECU (Smart Key ECU Assembly)
Main Body ECU (Multiplex Network Body ECU) Meter Mirror Sub-assembly*6
Multiplex Network Door ECU*11 Combination Meter Assembly
Radio Receiver Assembly*7 Engine Stop and Start ECU*8


DIAGNOSIS


a.

If a malfunction occurs on a CAN communication bus, ECUs that are connected to the CAN communication bus store Diagnostic Trouble Codes (DTCs) in memory.


b.

The 5-digit DTCs can be read by connecting the GTS to the DLC3.


c.

For details, refer to the Repair Manual.