Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM › from 2020.11
NM37A0E _55 Steering _086692 POWER ASSIST SYSTEMS _0415630 POWER STEERING SYSTEM CO CONTROL F

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM  CONTROL  POWER STEERING CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components of the EPS system are as follows:

Component Function

*1: Gasoline models

*2: HV models

*3: Models with lane tracing assist system

Rack and Pinion Power Steering Gear Assembly Reduction Mechanism Reduces the speed of the power steering motor and transmits the rotation of the power steering motor to the rack shaft.
Power Steering Torque Sensor Converts the twist of the steering torsion bar into an electrical signal and sends this value to the power steering ECU.
Power Steering Motor Generates power assist in accordance with the actuation current received from the power steering ECU.
Rotation Angle Sensor Transmits the rotation angle of the power steering motor to the power steering ECU.
Power Steering ECU
·

Actuates the power steering motor to provide power assist, based on the signals received from various sensors and ECUs.

·

Outputs a warning signal to the combination meter assembly when the power steering ECU detects an EPS system malfunction.


Brake Actuator Assembly Skid Control ECU*1
·

Outputs the vehicle speed signal.

·

Requests steering assist torque during cooperative control.


No. 2 Skid Control ECU*2
ECM
·

Outputs the engine speed.

·

Outputs the drive mode select signal.*1


Hybrid Vehicle Control ECU*2
·

Transmits the ready status signal to the power steering ECU.

·

Outputs the drive mode select signal.


Steering Sensor Detects the steering direction and angle of the steering wheel assembly.
No. 1 Pattern Select Switch Assembly Drive Mode Select Switch Switches the driving mode.
Combination Meter Assembly EPS Warning Light (Red Indicator) Illuminates to alert the driver when the power steering ECU detects a malfunction in the EPS system which results in a loss of steering assist torque.
EPS Warning Light (Yellow Indicator) Illuminates to alert the driver when the power steering ECU detects a malfunction in the EPS system which limits the steering assist torque.
Multi-information Display Displays a warning message to inform the driver of a malfunction in the EPS system.
Buzzer Sounds to warn the driver of a malfunction in the EPS system.
Air Conditioning Amplifier Assembly Receives a signal from the power steering ECU to limit electrical usage.
Forward Recognition Camera*3 Requests steering assist torque when the lane tracimg assist system estimates that the vehicle departs from its lane.
Network Gateway ECU Relays the signal between the CAN communication.



SYSTEM CONTROL


a.

The power steering ECU calculates the steering assist force based on steering torque information from the power steering torque sensor, vehicle speed information from the skid control ECU*1 or No. 2 skid control ECU*2 and information from each ECU and controls the power steering motor to generate the required steering assist torque.

*1: Gasoline models

*2: HV models


b.

The EPS system consists of the control functions listed below:

Control Outline

*1: Gasoline models

*2: HV models

Steering Assist Control Basic Control Calculates the assist current required based on the steering torque value and the vehicle speed and operates the power steering motor.
Compensation Control Compensates with a force, according to the driver's steering maneuver, improving the comfort of steering.
SPORT Mode Control When drive mode SPORT is selected, the power steering ECU switches to assist characteristics with higher steering responsiveness than Normal mode to achieve a more direct steering feeling.
Brake Control System Cooperative Control Receives requests from the skid control ECU*1 or No. 2 skid control ECU*2 and performs steering assist control in accordance with the operating condition of the brake control system. This facilitates the steering operation of the driver, achieving a high level of vehicle stability.
Driving Assistance System Request Control The power steering ECU operates the steering wheel and provides steering assistance using various driving assistance systems. For details, see each driving assistance system section.
Power Supply Voltage Drop Control When the power steering ECU detects a power supply voltage drop, it sends a load control demand to the air conditioning amplifier assembly in order to limit electrical usage.



FAIL-SAFE


a.

If the power steering ECU detects a malfunction in the EPS system, the power steering ECU illuminates the EPS warning light (red indicator*1 and yellow indicator*2), displays the warning message on the multi-information display, illuminates or flashes the master warning light and sounds the buzzer to alert the driver of the malfunction.

HINT:

*1: Illuminates when a malfunction which results in a loss of steering assist torque occurs.

*2: Illuminates when a malfunction which limits the steering assist torque occurs.




b.

If a system malfunction occurs, the power steering ECU changes control mode to fail-safe mode. For details, refer to the Repair Manual.



DIAGNOSIS


a.

The power steering ECU will also store a Diagnostic Trouble Code (DTC). The DTC can be accessed through the use of the GTS. For details, refer to the Repair Manual.