Home › Vehicle Interior › PRE-COLLISION › PRE-COLLISION SYSTEM › from 2020.11
NM37A0E _58 Vehicle Interior _087157 PRE-COLLISION _0417234 PRE-COLLISION SYSTEM DE DETAILS F

PRE-COLLISION  PRE-COLLISION SYSTEM  DETAILS  INDICATOR LIGHT/WARNING LIGHT/MULTI DISPLAY  


OPERATION


a.

Warning Indication

i.

The combination meter assembly uses the multi-information display, PCS warning light, VSC OFF indicator light and buzzer to provide the driver with pre-collision system malfunction and indications.

Models with 4.2 Inch Multi-information Display
Y254686C01
0.5,2 1.563,2 true 1.75,3.333 1.75,2.188 true 3.573,3.333 3.573,2.083 true 0.292,1.917 0.604,2.073 0.313,0.156 10 false *a 1.698,3.396 2.01,3.552 0.313,0.156 10 false *b 3.51,3.396 3.823,3.552 0.313,0.156 10 false *c
*a VSC OFF Indicator Light *b PCS Warning Light
*c Multi-information Display
·

LTA Indicator


- -


Models with 7 Inch Multi-information Display
Y254687C01
0.5,2 1.542,2 true 1.75,3.333 1.75,2.167 true 3.583,3.333 3.583,2.083 true 0.302,1.917 0.615,2.115 0.313,0.198 10 false *a 1.698,3.396 2.01,3.594 0.313,0.198 10 false *b 3.521,3.396 3.833,3.594 0.313,0.198 10 false *c
*a VSC OFF Indicator Light *b PCS Warning Light
*c Multi-information Display
·

LTA Indicator


- -




b.

Pre-collision System Operation Status Display

i.

If the forward recognition camera determines that the possibility of a collision is high, it sends a signal to the combination meter assembly and meter mirror sub-assembly*. Upon receiving this signal, the combination meter assembly and meter mirror sub-assembly* indicates a warning using the multi-information display, headup display* and buzzer. Details are indicated below.

Multi-information Display/Headup Display* Buzzer

*: Models with headup display

BRAKE! Sounds Continuously


ii.

For region A: When emergency steering assist operates, the LTA indicator in the combination meter assembly illuminates (green).



c.

Indicator Display when Pre-collision System Off

i.

When the pre-collision system is turned off in the settings menu of the multi-information display, the PCS warning light in the combination meter assembly illuminates and a message is displayed on the multi-information display.

Multi-information Display PCS Warning Light
Pre-Collision System OFF Illuminates


ii.

When pre-collision brake assist, pre-collision braking and emergency steering assist* operation are turned off using the VSC OFF switch, the VSC OFF indicator light and PCS warning light in the combination meter assembly illuminate, and a message is displayed on the multi-information display.

Multi-information Display VSC OFF Indicator Light PCS Warning Light

*: For region A

VSC Turned OFF Pre-Collision Brake System Unavailable Illuminates Illuminates



d.

Pre-collision System Warning Display

i.

When the system is not available, the following warning occurs to warn the driver.

Multi-information Display Detail PCS Warning Light Buzzer
Pre-Collision System Malfunction Visit Your Dealer This message appears when the forward recognition camera detects a system malfunction Illuminates Sounds once
Pre-Collision System Unavailable See Owner's Manual
·

Millimeter wave radar sensor assembly low voltage malfunction

·

Other millimeter wave radar sensor assembly malfunction


Illuminates -
Pre-Collision System Out of Temperature Range Unavailable See Owner's Manual Millimeter wave radar sensor assembly temperature malfunction Illuminates -
Pre-Collision System Radar Sensor Blocked Unavailable Clean Radar Sensor Dirty center mark of upper radiator grille or millimeter wave radar sensor assembly Illuminates -
Pre-Collision System Radar In Self Calibration Unavailable See Owner's Manual Millimeter wave radar sensor assembly misaligned Illuminates -
Front Camera Unavailable See Owner's Manual
·

Abnormal forward recognition camera voltage

·

Other forward recognition camera malfunction


Illuminates -
Front Camera Out of Temperature Range Unavailable Wait until Normal Temperature Forward recognition camera temperature outside of operational range Illuminates -
Front Camera Low Visibility Unavailable See Owner's Manual Dirty or fogged windshield glass over the forward recognition camera Illuminates -



e.

Changing settings of the pre-collision system

i.

Enabling/disabling the pre-collision system

1.

The pre-collision system can be enabled/disabled on setting display screen of the multi-information display.

HINT:

The system is automatically enabled each time the ignition switch is turned to ON.


2.

If the system is disabled, the PCS warning light will turn on and a message will be displayed on the multi-information display.

Y254688C02
0.188,0.521 0.354,0.708 0.167,0.188 10 true *a 5.667,0.146 5.979,0.302 0.313,0.156 10 false *b 5.667,1.479 5.979,1.635 0.313,0.156 10 false *c 0.26,2.479 0.573,2.635 0.313,0.156 10 false *d
*a Steering Pad Switch Assembly *b PCS warning Light
*c Multi-information Display *d The illustrations shown are examples only.




ii.

Changing the pre-collision warning timing

1.

The pre-collision warning timing can be changed on setting display screen of the multi-information display.

HINT:
·

The warning timing setting is retained when the ignition switch is turned off. However, if the pre-collision system is disabled and re-enabled, the operation timing will return to the default setting (middle).

·

For region A: If the pre-collision warning timing is changed, emergency steering assist timing will also be changed accordingly. If late is selected, emergency steering assist would not operate in case of an emergency.



Y254689C02
0.208,0.531 0.385,0.719 0.177,0.188 10 true *a 5.333,0.292 5.646,0.448 0.313,0.156 10 false *b 5.917,0.292 6.229,0.448 0.313,0.156 10 false *c 6.5,0.292 6.813,0.448 0.313,0.156 10 false *d 0.313,2.448 0.625,2.604 0.313,0.156 10 false *e
*a Steering Pad Switch Assembly *b Early
*c Middle (This is the default setting.) *d Late
*e The illustrations shown are examples only. - -