Home › Vehicle Exterior › WINDOW / GLASS › WINDSHIELD / WINDOW GLASS SYSTEM › from 2020.11
NM37A0E _59 Vehicle Exterior _087238 WINDOW / GLASS _0417541 WINDSHIELD / WINDOW GLASS SYSTEM CO CONTROL F

WINDOW / GLASS  WINDSHIELD / WINDOW GLASS SYSTEM  CONTROL  WINDSHIELD DEICER CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function

*1: Except models with 12.3 inch display

*2: Models with 12.3 inch display

Air Conditioning Control Assembly*1
·

Front Wiper Deicer Switch


Sends the front wiper deicer switch operation signal to the air conditioning amplifier assembly.
Multi-display Assembly*2
·

Front Wiper Deicer Switch


Sends the front wiper deicer switch operation signal to the integration control sub-assembly.
Integration Control Sub-assembly*2 Sends signals to the air conditioning amplifier assembly to operate the windshield deicer system.
Air Conditioning Amplifier Assembly Turn on a DEICER relay from front wiper deicer switch on for approximately 15 minutes.
No. 1 Engine Room Relay Block and No. 1 Junction Block Assembly
·

DEICER Relay


Supply an electric current to front windshield deicer in the windshield glass by the on signal from air conditioning amplifier assembly.
Windshield Glass
·

Windshield Deicer Wire


Applies electrical current to a windshield deicer in the windshield glass to generate heat and remove ice from the windshield and wiper blades.


SYSTEM CONTROL


a.

Windshield Deicer System

i.

When the front wiper deicer switch is turned on with the ignition switch ON, the front wiper deicer switch on signal is sent to the air conditioning amplifier assembly. When the air conditioning amplifier assembly receives this signal, it turns the relay on.


ii.

The air conditioning amplifier assembly counts the time of the timer, and after it continuously sends operation signals for approximately 15 minutes, it stops sending the signal.