CONSTRUCTION
Kick Door Control Sensor
The kick door control sensor is installed inside the rear bumper, and is composed of a sensor and ECU.
| *1 | Sensor Portion | *2 | ECU Portion |
OPERATION
Hands Free Power Back Door Operation
The kick door control sensor detects a kick operation of a user carrying the electrical key transmitter sub-assembly. When the kick operation is detected, a signal to operate the power back door is sent to the power back door ECU (multiplex network door ECU).
| *1 | Kick Door Control Sensor | *2 | Electrical Key Transmitter Sub-assembly |
| *a | Rear Bumper | *b | Within 100 mm (3.94 in.) |
| *c | Step 1:
The user carrying an electrical key transmitter sub-assembly stands around the center of the rear bumper while maintaining a certain distance (approximately equal to the length of the arm) from the rear bumper. |
*d | Step 2:
The back door opens or closes when the user performs the following operations within 1 second. 1.
The user moves their foot into the area that is within 100 mm (3.94 in.) of the rear bumper. 2.
The user moves their foot away from the rear bumper. |
| *e | The illustrations shown are examples only. | - | - |