Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for 8 Inch Display) › from 2020.11
NM37A0E _56 Audio / Visual / Telematics _088238 NAVIGATION / MULTI INFO DISPLAY _0459992 NAVIGATION SYSTEM(for 8 Inch Display) DE DETAILS F

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for 8 Inch Display)  DETAILS  RADIO MODE  


AM AND FM FUNCTION


a.

Radio frequency band

i.

Radio broadcasts use the radio frequency bands shown in the table below.

E177192E13
0.677,0.302 1.469,0.51 0.792,0.208 10 Frequency 1.875,0.302 2.417,0.469 0.542,0.167 10 30 kHz 5.25,0.302 5.833,0.469 0.583,0.167 10 30 MHz 4.125,0.302 4.677,0.469 0.552,0.167 10 3 MHz 2.979,0.302 3.635,0.469 0.656,0.167 10 300 kHz 6.365,0.302 6.979,0.469 0.615,0.167 10 300 MHz 0.677,0.885 1.469,1.094 0.792,0.208 10 Designation 0.677,1.354 1.458,1.563 0.781,0.208 10 Radio wave 0.677,1.833 1.469,2.042 0.792,0.208 10 Modulation 2.594,0.885 2.823,1.063 0.229,0.177 10 LF 3.688,0.885 3.917,1.063 0.229,0.177 10 MF 4.854,0.885 5.083,1.063 0.229,0.177 10 HF 5.896,0.885 6.219,1.063 0.323,0.177 10 VHF 3.51,1.375 4.177,1.771 0.667,0.396 10 AM 5.781,1.375 6.552,1.792 0.771,0.417 10 FM 5.552,1.833 6.99,2 1.438,0.167 10 Frequency modulation 3.083,1.833 4.521,2 1.438,0.167 10 Amplitude modulation 0.344,2.344 1.594,2.552 1.25,0.208 10 LF: Low Frequency 5.26,2.344 6.979,2.552 1.719,0.208 10 VHF: Very High Frequency 3.74,2.344 5.063,2.552 1.323,0.208 10 HF: High Frequency 1.865,2.344 3.5,2.552 1.635,0.208 10 MF: Medium Frequency



b.

Service area

i.
E177193C12
0.937,2.07 1.107,2.226 0.17,0.156 10 *a 1.77,3.075 1.94,3.231 0.17,0.156 10 *c 1.354,2.56 1.524,2.716 0.17,0.156 10 *b
*a FM (Stereo)
*b FM (Monaural)
*c AM


The service areas of AM and FM broadcasts are vastly different. Sometimes an AM broadcast can be received very clearly but an FM stereo broadcast cannot. FM stereo has the smallest service area, and is prone to pick up static and other types of interference such as noise.



c.

Radio reception problems

HINT:

In addition to static, other problems such as "phasing", "multipath" and "fade out" exist. These problems are not caused by electrical noise, but by the radio signal propagation method itself.


i.
E177194C12
0.095,0.054 0.306,0.224 0.212,0.17 10 *a 2.88,0.918 3.092,1.088 0.212,0.17 10 *b 2.38,0.363 2.956,0.69 2.956,0.69 2.956,0.879 false
*a Phasing
*b Ionosphere


Phasing

AM broadcasts are susceptible to electrical interference and another kind of interference called phasing. Occurring only at night, phasing is the interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off the ionosphere and the other signal is received directly from the transmitter.


ii.
E177195C12
0.103,0.084 0.298,0.237 0.194,0.153 10 *a
*a Multipath


Multipath

Multipath is a type of interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off buildings or mountains and the other signal is received directly from the transmitter.


iii.
E177196C11
0.112,0.045 0.282,0.229 0.17,0.184 10 *a
*a Fade Out


Fade out

Fade out is caused by objects (buildings, mountains and other such large obstacles) that deflect away part of a signal, resulting in a weaker signal when the object is between the transmitter and vehicle. High frequency radio waves, such as FM broadcasts, are easily deflected by obstructions. Low frequency radio waves, such as AM broadcasts, are less likely to deflect.



d.

Noise problem

Technicians must have a clear understanding about each customer's noise complaint. Use the following table to diagnose noise problems.

Radio Frequency Noise Occurrence Condition Presumable Cause
AM Noise occurs in a specific area Foreign noise
Noise occurs when listening to an intermittent broadcast An identical program transmitted from multiple towers can cause noise where the signals overlap
Noise occurs only at night Signal phasing
FM Noise occurs while driving in a specific area Multipath resulting from a change in FM frequency



DIGITAL AUDIO BROADCAST (DAB) FUNCTION (w/ DAB Function)


a.

Digital Audio Broadcast (DAB)

i.

Digital Audio Broadcast (DAB) reception is available. This mostly prevents broadcast interference, achieving clear reception with high quality sound.


ii.

The time shift operation function can be used to play back DAB programs at a later time.

HINT:

The amount of playback possible depends on the bit rate of the DAB station to be recorded, the amount of DAB unit memory, and the time at which reception of the broadcast began.