CONSTRUCTION
Impact Absorbing Structure for Frontal Collision
A structure that ensures collision energy absorption efficiency, dissipates impact and minimizes cabin deformation during a frontal collision has been achieved.
A widened structure has been adopted for the side member to provide support for a variety of collision types.
The side member sub-assembly absorb and disperse collision energy received from the front bumper reinforcement.
| *1 | Front Bumper Reinforcement | *2 | Front Side Member Sub-assembly |
|
Front Impact Energy | - | - |
Collision energy applied to the front side member sub-assembly is transmitted to the front apron to cowl side member sub-assembly and cowl under section.
The front lower side member and lower side members absorb and disperse collision energy received from the radiator support lower cross member.
Collision energy applied to the lower side members is transmitted to the front suspension cross member and floor panel.
| *1 | Front Bumper Reinforcement | *2 | Front Side Member Sub-assembly |
| *3 | Front Apron | *4 | Front Lower Side Member |
| *5 | Front Suspension Cross Member | - | - |
|
Front Impact Energy |
|
Dissipate |
Front body pillars have been strengthened to optimize dispersal of collision energy to the rail panel, rocker panel and floor panel.
| *1 | Front Body Pillar | *2 | Rail Panel |
| *3 | Rocker Panel | - | - |
| *a | Hot-stamped Steel Sheet | *b | Ultra High-tensile Strength Steel Sheet (1180 MPa) |
| *c | Ultra High-tensile Strength Steel Sheet (980 MPa) | *d | Others: High-tensile Strength Steel Sheet (780 MPa or less) |
|
Front Impact Energy |
|
Dissipate |
Collision energy applied to the front body pillar transmitted to cowl panel reinforcement and instrument panel reinforcement circular structure via the instrument panel reinforcement cowl side bracket.
| *1 | Rocker Panel Reinforcement | *2 | Instrument Panel Reinforcement Cowl Side Bracket |
| *3 | Instrument Panel Reinforcement | - | - |
| *a | The illustration shown is an example. | - | - |
Collision energy applied to the dash panel cross member transmitted to the rocker panel, floor member and floor tunnel.
| *1 | Front Side Member Sub-assembly | *2 | Dash Panel Cross Member |
| *3 | Rocker Panel | *4 | Floor Member |
| *5 | Floor Tunnel | - | - |
| *a | The illustration shown is an example. | - | - |
|
Dissipate | - | - |
Impact Absorbing Structure for Side Collision
A structure that ensures collision energy absorption efficiency, dissipates impact and minimizes cabin deformation during a side collision has been achieved.
Hot-stamped sheet steel are used for the center pillar outer reinforcement.
Ultra high-tensile strength sheet steel is used for the roof panel reinforcement and center body pillar inner reinforcement.
A structure which uses the floor side member reinforcement and rocker inner side panel to efficiently transmit impact load during a side collision to the floor is used.
| *a | Hot-stamped Steel Sheet | *b | Ultra High-tensile Strength Steel Sheet (1180 MPa) |
| *c | Ultra High-tensile Strength Steel Sheet (980 MPa) | *d | Others: High-tensile Strength Steel Sheet (780 MPa or less) |
A lightweight and sturdy brackets are used for the roof side bracket of the sliding roof to ensure safety.
Lessening Pedestrian Injury
A front bumper with a large area above the front grille to hood has been provided to dampen the impact to pedestrian in the event of a collision.
| *1 | Front Bumper | *2 | Hood |
| *3 | Front Grille | - | - |
| *a | A-A Cross Section | - | - |