Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM (for HV Model) › from 2021.10
NM37A0E _57 Power Source / Network _086694 NETWORKING _0419116 CAN COMMUNICATION SYSTEM(for HV Model) CO CONTROL F

NETWORKING  CAN COMMUNICATION SYSTEM(for HV Model)  CONTROL  CAN COMMUNICATION CONTROL  


FUNCTION


CAN Connection Components

*1: Models with Toyota safety sense

*2: Models with Toyota parking assist sensor system

*3: Models with panoramic view monitor system

*4: Models with blind spot monitor system

*5: Models with panoramic view monitor system or parking assist monitor system

*6: Models with vehicle proximity notification system

*7: 4WD/AWD models

*8: Models with telematics transceiver

*9: Models with 8-inch display

*10: Models with 12.3-inch display

*11: Models with seat position memory system

*12: Models with Toyota multi operation touch system

*13: Models with headup display system

*14: Models with power back door system

Central Gateway ECU (Network Gateway ECU) Forward Recognition Camera*1
Millimeter Wave Radar Sensor Assembly*1 Clearance Warning ECU Assembly*2
Parking Assist ECU*3 Blind Spot Monitor Sensor LH*4
Rear Television Camera Assembly*5 Hybrid Vehicle Control ECU
Vehicle Approaching Speaker Controller*6 No. 1 Skid Control ECU (Brake Booster with Master Cylinder Assembly)
No. 2 Skid Control ECU (Brake Actuator Assembly) Inverter with Converter Assembly*7
ECM DCM (Telematics Transceiver)*8
Radio and Display Receiver Assembly*9 Radio Receiver Assembly*10
Yawrate Sensor Power Steering ECU (Rack and Pinion Power Steering Gear Assembly)
Tire Pressure Warning ECU and Receiver Steering Sensor
Airbag Sensor Assembly Certification ECU (Smart Key ECU Assembly)
Air Conditioning Amplifier Assembly Outer Mirror Control ECU Assembly RH*11
Integration Control Sub-assembly*12 Main Body ECU (Multiplex Network Body ECU)
Meter Mirror Sub-assembly*13 Outer Mirror Control ECU Assembly LH*11
Position Control ECU Assembly LH*11 Position Control ECU Assembly RH*11
Multiplex Network Door ECU*14 Combination Meter Assembly


DIAGNOSIS


a.

If a malfunction occurs on a CAN communication bus, ECUs that are connected to the CAN communication bus store Diagnostic Trouble Codes (DTCs) in memory.


b.

The 5-digit DTCs can be read by connecting the GTS to the DLC3.


c.

For details, refer to the Repair Manual.