Home › Vehicle Exterior › MIRROR (EXT) › OUTER REAR VIEW MIRROR GLASS
RM37A0E _59 Vehicle Exterior _086891 MIRROR (EXT) _0416362 OUTER REAR VIEW MIRROR GLASS G

MIRROR (EXT)  OUTER REAR VIEW MIRROR GLASS  INSPECTION  


PROCEDURE

Hide 87931 1.INSPECT OUTER MIRROR RH

a.

Check the outer mirror heater operation.

i.
B565334C01
1.5,1.427 1.5,1.76 true 2,1.302 2,1.635 true 1.458,1.771 1.615,1.969 0.156,0.198 10 true 1 1.969,1.646 2.125,1.844 0.156,0.198 10 true 2 0.083,0.083 0.313,0.333 0.229,0.25 10 true *a
*a Component without harness connected
(Outer Mirror RH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 25°C (77°F) 3.57 to 4.83 Ω


If the result is not as specified, replace the outer mirror RH.



b.

Check the operation of the outer rear view mirror indicator. (for Type A with Blind Spot Monitor System)

NOTICE:

Do not apply a voltage of more than 6.5 V.


i.

Connect 4 new 1.5 V dry-cell batteries in series.


ii.
B565335C01
0.083,0.094 0.396,0.25 0.313,0.156 10 false *a
*a Component without harness connected
(Outer Mirror RH)


Apply 6 V battery voltage to the terminals of the connector, and check that the outer rear view mirror indicator comes on.

OK:
Tester Connection Specified Condition
6 V battery positive (+) → Terminal 1
6 V battery negative (-) → Terminal 2
Outer rear view mirror indicator comes on


If the result is not as specified, replace the outer mirror RH.



c.

Check the operation of the outer rear view mirror indicator. (for Type B with Blind Spot Monitor System)

NOTICE:

Do not apply a voltage of more than 6.5 V.


i.

Connect 4 new 1.5 V dry-cell batteries in series.


ii.
B616138C02
0.135,0.115 0.458,0.302 0.323,0.188 10 false *a
*a Component without harness connected
(Outer Mirror RH)


Apply 6 V battery voltage to the terminals of the connector, and check that the outer rear view mirror indicator comes on.

OK:
Tester Connection Specified Condition
6 V battery positive (+) → Terminal 1
6 V battery negative (-) → Terminal 2
Outer rear view mirror indicator comes on


If the result is not as specified, replace the outer mirror RH.



Hide 87961 2.INSPECT OUTER MIRROR LH

a.

Check the outer mirror heater operation.

i.
B565336C01
1.75,1.854 1.75,1.521 true 1.208,1.688 1.208,1.354 true 0.104,0.083 0.417,0.24 0.313,0.156 10 false *a 1.719,1.885 1.875,2.083 0.156,0.198 10 true 1 1.167,1.698 1.323,1.896 0.156,0.198 10 true 2
*a Component without harness connected
(Outer Mirror LH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 25°C (77°F) 3.57 to 4.83 Ω


If the result is not as specified, replace the outer mirror LH.



b.

Check the operation of the outer rear view mirror indicator. (for Type A with Blind Spot Monitor System)

NOTICE:

Do not apply a voltage of more than 6.5 V.


i.

Connect 4 new 1.5 V dry-cell batteries in series.


ii.
B565337C01
0.104,0.094 0.417,0.25 0.313,0.156 10 false *a
*a Component without harness connected
(Outer Mirror LH)


Apply 6 V battery voltage to the terminals of the connector, and check that the outer rear view mirror indicator comes on.

OK:
Tester Connection Specified Condition
6 V battery positive (+) → Terminal 1
6 V battery negative (-) → Terminal 2
Outer rear view mirror indicator comes on


If the result is not as specified, replace the outer mirror LH.



c.

Check the operation of the outer rear view mirror indicator. (for Type B with Blind Spot Monitor System)

NOTICE:

Do not apply a voltage of more than 6.5 V.


i.

Connect 4 new 1.5 V dry-cell batteries in series.


ii.
B616136C01
0.135,0.115 0.427,0.323 0.292,0.208 10 true *a
*a Component without harness connected
(Outer Mirror LH)


Apply 6 V battery voltage to the terminals of the connector, and check that the outer rear view mirror indicator comes on.

OK:
Tester Connection Specified Condition
6 V battery positive (+) → Terminal 1
6 V battery negative (-) → Terminal 2
Outer rear view mirror indicator comes on


If the result is not as specified, replace the outer mirror LH.