Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
87961
1.INSTALL OUTER MIRROR
for Type A:
Connect each connector.
w/ Blind Spot Monitor System:
Engage the 2 claws.
for Type B:
w/o Blind Spot Monitor System:
Connect the 2 connectors.
w/ Blind Spot Monitor System:
Connect the 3 connectors.
Engage the 3 clamps.
Engage the 8 claws to install the outer mirror.
Do not push the outer mirror with excessive force. Doing so may break the mirror surface.
Remove the protective tape.