Wear protective gloves. Sharp areas on the parts may injure your hands.
72265
1.INSTALL SEAT TRACK UPPER RAIL COVER
|
Install in this Direction |
Engage the 4 claws to install the seat track upper rail cover as shown in the illustration.
Use the same procedure for both sides.
72211
2.INSTALL SEAT TRACK ADJUSTING HANDLE
Engage the 2 claws to install the seat track adjusting handle to the front seat adjuster assembly.
72125U
3.INSTALL REAR UPPER SEAT TRACK COVER
Operate the seat track adjusting handle and move the front seat adjuster assembly to the rearmost position.
|
Install in this Direction |
Engage the 4 claws to install the rear upper seat track cover as shown in the illustration.
Use the same procedure for both sides.
71051A
4.INSTALL FRONT SEAT CUSHION SPRING SUB-ASSEMBLY
Engage the 6 hooks to install the front seat cushion spring sub-assembly to the front seat adjuster assembly.
7181A
5.INSTALL FRONT SEAT CUSHION WIRE HARNESS HOLDER
w/ Wiring Harness Connector:
Engage the claw to install the wiring harness connector to the front seat cushion wire harness holder.
Engage the claw to install the front seat cushion wire harness holder.
Install the 2 screws.
82191
6.INSTALL FRONT SEAT WIRE (w/ Seat Heater System)
Engage the claw and 3 clamps to install the front seat wire.
71875A
7.INSTALL RECLINING ADJUSTER INSIDE COVER RH
for LH Side:
Engage the 4 claws to install the reclining adjuster inside cover RH.
for RH Side:
Engage the 4 claws to install the reclining adjuster inside cover RH.
87510K
8.INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)
71071S
9.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER
Engage the 14 claws to install the separate type front seat cushion cover to the separate type front seat cushion pad.
10.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
Engage the 10 hooks to install the separate type front seat cushion cover with pad to the separate type front seat cushion spring assembly.
Engage the 2 hooks.
|
Install in this Direction |
Engage the claw to install the connector holder as shown in the illustration.
w/ Seat Heater System:
Connect the connector and engage the clamp.
71759C
11.INSTALL FRONT NO. 1 SEATBACK HOOK
Install the 2 front No. 1 seatback hooks to the front seatback frame sub-assembly.
71587
12.INSTALL FRONT SEATBACK EDGE PROTECTOR
Install the 2 front seatback edge protectors to the front seatback spring sub-assembly.
71053S
13.INSTALL FRONT SEATBACK SPRING SUB-ASSEMBLY
|
Install in this Direction |
Install the front seatback spring sub-assembly to the front seatback frame sub-assembly as shown in the illustration.
Engage the 2 claws to install the 2 front seatback edge protectors to the front seatback frame sub-assembly.
73910A
14.INSTALL FRONT SEAT AIRBAG ASSEMBLY
87510M
15.INSTALL FRONT SEATBACK HEATER ASSEMBLY (w/ Seat Heater System)
71073S
16.INSTALL SEPARATE TYPE FRONT SEATBACK COVER
Engage the 9 claws to install the separate type front seatback cover to the separate type front seatback pad.
17.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
Install the separate type front seatback cover with pad.
71930A
18.INSTALL FRONT SEAT HEADREST SUPPORT ASSEMBLY
Engage the 4 claws to install the 2 front seat headrest support assemblies.
Close the 2 fasteners.
w/ Seat Heater System:
Engage the clamp.
Engage the 3 hooks.
19.INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY
Engage the 4 guides.
Install the separate type front seatback assembly to the separate type front seat cushion assembly with the 4 bolts.
Engage the claw and 4 clamps to install the front seat airbag assembly wire harness.
Engage the claw first.
w/ Seat Heater System:
Engage the clamp.
Connect the connector.
Engage the 2 hooks.
Pass the separate type front seatback cover through the grooves of the reclining adjuster inside covers RH.
71861
20.INSTALL FRONT SEAT INNER CUSHION SHIELD
|
Install in this Direction |
Engage the 2 claws and 2 guides as shown in the illustration.
Engage the 3 claws to install the front seat inner cushion shield.
71811D
21.INSTALL FRONT SEAT CUSHION SHIELD
|
Install in this Direction (1) |
|
Install in this Direction (2) |
Engage the guide (A) as shown in the illustration.
Engage the 3 claws and 2 guides (B) as shown in the illustration.
Engage the 3 claws to install the front seat cushion shield.
72525A
22.INSTALL RECLINING ADJUSTER RELEASE HANDLE
Install the reclining adjuster release handle.
72551B
23.INSTALL RECLINING HINGE COVER
Engage the guide.
Engage the claw to install the reclining hinge cover.
71073S
24.CONNECT SEPARATE TYPE FRONT SEATBACK COVER
Connect the rubber band of the separate type front seatback cover.
73230
25.INSTALL FRONT SEAT INNER BELT ASSEMBLY
87501A
26.INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)