Home › Vehicle Interior › SEAT › SEAT MEMORY SWITCH › 2020.02–2020.11
RM37A0E _58 Vehicle Interior _086894 SEAT _0416491 SEAT MEMORY SWITCH G

SEAT  SEAT MEMORY SWITCH  INSPECTION  


PROCEDURE

Hide 84927 1.INSPECT SEAT MEMORY SWITCH

a.
B564945C01
1.583,2.333 1.583,1.75 true 2.083,2.333 2.083,1.75 true 2.583,2.333 2.583,1.75 true 1.521,2.385 1.833,2.583 0.313,0.198 10 false *a 2.5,2.385 2.813,2.583 0.313,0.198 10 false *b 2.021,2.385 2.333,2.583 0.313,0.198 10 false *c 0.75,2.833 1.063,3.031 0.313,0.198 10 false *d
*a SET Switch
*b M1 Switch
*c M2 Switch
*d Component without harness connected
(Seat Memory Switch)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

If the result is not as specified, replace the seat memory switch.

3 - 1 M1 switch pressed Below 1 Ω
M1 switch not pressed 10 kΩ or higher
4 - 1 M2 switch pressed Below 1 Ω
M2 switch not pressed 10 kΩ or higher
2 - 1 SET switch pressed Below 1 Ω
SET switch not pressed 10 kΩ or higher