Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY
RM37A0E _59 Vehicle Exterior _086888 LIGHTING (EXT) _0416584 HEADLIGHT ASSEMBLY G

LIGHTING (EXT)  HEADLIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81150 1.INSPECT HEADLIGHT ASSEMBLY LH

a.

Illumination Inspection

1.
E430897C03
2.25,0.76 2.667,0.51 true 1.313,0.75 1.063,0.417 true 2.615,1.885 2.198,1.469 true 1.75,0.75 2.167,0.333 true 1.083,1.833 1.323,1.479 true 0.167,0.167 0.479,0.323 0.313,0.156 10 false *a 2.708,0.417 3.021,0.615 0.313,0.198 10 false LO 2.667,1.833 2.823,2.031 0.156,0.198 10 false E 1.01,1.865 1.323,2.063 0.313,0.198 10 false HI 0.948,0.25 1.26,0.448 0.313,0.198 10 false DRL 2.135,0.188 2.448,0.385 0.313,0.198 10 false CLL
*a Component without harness connected
(Headlight Assembly LH)


Apply auxiliary battery voltage to the headlight assembly LH and check that the lights illuminate.

OK:
Daytime running light
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal 3 (DRL)
Auxiliary battery negative (-) → Terminal 4 (E)
Daytime running light illuminates


OK:
Clearance light
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal 2 (CLL)
Auxiliary battery negative (-) → Terminal 4 (E)
Clearance light illuminates


OK:
Lo beam headlight
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal 1 (LO)
Auxiliary battery negative (-) → Terminal 4 (E)
Lo beam headlight illuminates


OK:
Hi beam headlight
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal 6 (HI)
Auxiliary battery negative (-) → Terminal 4 (E)
Hi beam headlight illuminates



If the result is not as specified, replace the headlight assembly LH.


Hide 81110 2.INSPECT HEADLIGHT ASSEMBLY RH

a.

Illumination Inspection

1.
E430897C03
2.25,0.76 2.667,0.51 true 1.313,0.75 1.063,0.417 true 2.615,1.885 2.198,1.469 true 1.75,0.75 2.167,0.333 true 1.083,1.833 1.323,1.479 true 0.167,0.167 0.479,0.323 0.313,0.156 10 false *a 2.708,0.417 3.021,0.615 0.313,0.198 10 false LO 2.667,1.833 2.823,2.031 0.156,0.198 10 false E 1.01,1.865 1.323,2.063 0.313,0.198 10 false HI 0.948,0.25 1.26,0.448 0.313,0.198 10 false DRL 2.135,0.188 2.448,0.385 0.313,0.198 10 false CLL
*a Component without harness connected
(Headlight Assembly RH)


Apply auxiliary battery voltage to the headlight assembly RH and check that the lights illuminate.

OK:
Daytime running light
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal 3 (DRL)
Auxiliary battery negative (-) → Terminal 4 (E)
Daytime running light illuminates


OK:
Clearance light
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal 2 (CLL)
Auxiliary battery negative (-) → Terminal 4 (E)
Clearance light illuminates


OK:
Lo beam headlight
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal 1 (LO)
Auxiliary battery negative (-) → Terminal 4 (E)
Lo beam headlight illuminates


OK:
Hi beam headlight
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal 6 (HI)
Auxiliary battery negative (-) → Terminal 4 (E)
Hi beam headlight illuminates



If the result is not as specified, replace the headlight assembly RH.