Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY
RM37A0E _59 Vehicle Exterior _086888 LIGHTING (EXT) _0416588 REAR COMBINATION LIGHT ASSEMBLY G

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81560 1.INSPECT REAR COMBINATION LIGHT ASSEMBLY LH

a.

Illumination Inspection

1.
E430900C01
1.542,0.854 1.167,0.5 true 2.365,1.875 2,1.51 true 1.542,1.521 1.156,1.865 true 0.188,0.167 0.5,0.323 0.313,0.156 10 false *a 1.01,1.885 1.469,2.083 0.458,0.198 10 false STP 2.396,1.854 2.552,2.052 0.156,0.198 10 false E 1.083,0.344 1.396,0.542 0.313,0.198 10 false TL
*a Component without harness connected
(Rear Combination Light Assembly LH)


Apply auxiliary battery voltage to the rear combination light assembly LH and check that the lights illuminate.

OK:
Taillight
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal 2 (TL)
Auxiliary battery negative (-) → Terminal 3 (E)
Taillight illuminates


If the result is not as specified, replace the rear combination light assembly LH, rear combination light cord or tail light LED.

OK:
Stop light
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal 4 (STP)
Auxiliary battery negative (-) → Terminal 3 (E)
Stop light illuminates


If the result is not as specified, replace the rear combination light assembly LH, rear combination light cord or stop light LED.



Hide 81550 2.INSPECT REAR COMBINATION LIGHT ASSEMBLY RH

a.

Illumination Inspection

1.
E430900C01
1.542,0.854 1.167,0.5 true 2.365,1.875 2,1.51 true 1.542,1.521 1.156,1.865 true 0.188,0.167 0.5,0.323 0.313,0.156 10 false *a 1.01,1.885 1.469,2.083 0.458,0.198 10 false STP 2.396,1.854 2.552,2.052 0.156,0.198 10 false E 1.083,0.344 1.396,0.542 0.313,0.198 10 false TL
*a Component without harness connected
(Rear Combination Light Assembly RH)


Apply auxiliary battery voltage to the rear combination light assembly RH and check that the lights illuminate.

OK:
Taillight
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal 2 (TL)
Auxiliary battery negative (-) → Terminal 3 (E)
Taillight illuminate


If the result is not as specified, replace the rear combination light assembly RH, rear combination light cord or tail light LED.

OK:
Stop light
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal 4 (STP)
Auxiliary battery negative (-) → Terminal 3 (E)
Stop light illuminates


If the result is not as specified, replace the rear combination light assembly RH, rear combination light cord or stop light LED.