Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
81550N
1.REMOVE BACK-UP LIGHT BULB
Disconnect the connector.
|
Remove in this Direction |
Turn the rear light socket and wire with the back-up light bulb as shown in the illustration to remove them as a unit.
Remove the back-up light bulb from the rear light socket and wire.
81585
2.REMOVE REAR LIGHT SOCKET AND WIRE
8158A
3.REMOVE REAR LIGHT LED
Disconnect the connector.
|
Remove in this Direction |
Turn the rear light LED as shown in the illustration to remove it.
81594B
4.REMOVE REAR LIGHT PACKING
Remove the rear light packing.
Be sure to remove all traces of the old rear light packing from the vehicle body.
Do not reuse the removed rear light packing. Be sure to install a new rear light packing to prevent water ingress.
81584D
5.REMOVE REAR LIGHT GASKET
Remove the rear light gasket.
Be sure to remove all traces of the old rear light gasket from the vehicle body.
Do not reuse the removed rear light gasket. Be sure to install a new rear light gasket to prevent water ingress.