Home › Vehicle Exterior › LIGHTING (EXT) › SWITCH HOUSING
RM37A0E _59 Vehicle Exterior _086888 LIGHTING (EXT) _0416597 SWITCH HOUSING A

LIGHTING (EXT)  SWITCH HOUSING  INSTALLATION  


PROCEDURE

Hide 84319 1.INSTALL STEERING WHEEL SWITCH HOUSING

a.

When reusing the steering wheel switch housing:

i.
E430820

Using pliers, expand the clamp and temporarily install the steering wheel switch housing as shown in the illustration.


ii.
E430822C01
0,0 0,0 false
V113147

Install in this Direction


While holding the clamp expanded, engage the claw as shown in the illustration.


iii.
E430823

Release the clamp to install the steering wheel switch housing as shown in the illustration.



b.

When installing a new steering wheel switch housing:

i.
E430824

Temporarily install the steering wheel switch housing.


ii.
E430825C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claw as shown in the illustration.


iii.
E430826C01
1.667,0.625 2.052,0.344 true 2.042,0.26 2.354,0.417 0.313,0.156 10 true *a
*a Pin
V113147

Remove in this Direction


Remove the pin to install the steering wheel switch housing as shown in the illustration.



Hide 84329 2.INSTALL TURN SIGNAL SWITCH

Hide 84650 3.INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

Hide 4.INSTALL SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY