Home › Vehicle Exterior › LIGHTING (EXT) › STOP LIGHT SWITCH
RM37A0E _59 Vehicle Exterior _086888 LIGHTING (EXT) _0416600 STOP LIGHT SWITCH G

LIGHTING (EXT)  STOP LIGHT SWITCH  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 84340 1.INSPECT STOP LIGHT SWITCH ASSEMBLY

a.

Disconnect the A42 stop light switch assembly connector.


b.
E367717C18
1.5,0.25 1.833,0.5 0.333,0.25 1.167,1.792 1.333,1.208 true 2.177,1.792 2.01,1.208 true 2.458,1.792 2.208,1.208 true 1.552,0.302 2.01,0.5 0.458,0.198 10 false A42 1.021,1.802 1.417,2.031 0.396,0.229 10 false GND 2.167,1.802 2.385,2.021 0.219,0.219 10 false B 2.417,1.802 2.635,2.021 0.219,0.219 10 false B 0.167,0.177 0.479,0.333 0.313,0.156 10 false *a
*a Front view of wire harness connector
(to Stop Light Switch Assembly)


Measure the voltage and resistance on the wire harness side connector according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
A42-7 (B) - A42-2 (GND) Always 11 to 14 V
A42-6 (B) - A42-2 (GND) Ignition switch on (IG) 11 to 14 V


Standard Resistance:
Tester Connection Condition Specified Condition
A42-2 (GND) - Body ground Always Below 1 Ω


If the result is not as specified, repair or replace the wire harness or connector.


c.

Connect the A42 stop light switch assembly connector.


d.
E394392C25
1.521,0.344 1.854,0.594 0.333,0.25 1.917,1.667 1.802,1.156 true 2.167,1.667 1.906,1.156 true 2.417,1.667 2.042,1.156 true 1.417,1.667 1.677,1.167 true 1.167,1.667 1.573,1.167 true 0.188,0.177 0.5,0.333 0.313,0.156 10 false *a 1.573,0.396 2.031,0.594 0.458,0.198 10 false A42 2.417,1.667 2.875,1.865 0.458,0.198 10 false OUT 2.083,1.667 2.542,1.865 0.458,0.198 10 false GND 1.885,1.667 2.042,1.865 0.156,0.198 10 false L 1.271,1.667 1.729,1.865 0.458,0.198 10 false ACC 1.094,1.667 1.25,1.865 0.156,0.198 10 false L
*a Component with harness connected
(Stop Light Switch Assembly)


Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
A42-1 (OUT) - A42-2 (GND) Ignition switch off, brake pedal not depressed Below 1 V
A42-1 (OUT) - A42-2 (GND) Ignition switch off, brake pedal depressed 11 to 14 V
A42-3 (L) - A42-2 (GND) Ignition switch off, brake pedal not depressed Below 1 V
A42-3 (L) - A42-2 (GND) Ignition switch off, brake pedal depressed 11 to 14 V
A42-4 (ACC) - A42-2 (GND) Always 11 to 14 V
A42-5 (L) - A42-2 (GND) Ignition switch on (IG), brake pedal not depressed 11 to 14 V
A42-5 (L) - A42-2 (GND) Ignition switch on (IG), brake pedal depressed Below 1 V


If the result is not as specified, replace the stop light switch assembly.