Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW REGULATOR MOTOR (for Rear Door)
RM37A0E _59 Vehicle Exterior _086899 WINDOW / GLASS _0416693 POWER WINDOW REGULATOR MOTOR(for Rear Door) G

WINDOW / GLASS  POWER WINDOW REGULATOR MOTOR(for Rear Door)  INSPECTION  


PROCEDURE

Hide 85720E 1.INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

a.
B564595C01
1.25,1.906 2.031,1.771 true 0.344,2.813 0.656,2.969 0.313,0.156 10 false *a 2.854,2.531 3.167,2.688 0.313,0.156 10 false *b 3.073,1.896 3.385,2.052 0.313,0.156 10 false *c 1.052,1.823 1.365,1.979 0.313,0.156 10 false *d
*a Component without harness connected
(Power Window Regulator Motor Assembly LH)
*b Clockwise
*c Counterclockwise
*d Motor gear


Connect a positive (+) lead from the auxiliary battery to connector terminal 2.

NOTICE:

Do not connect a positive (+) lead from the auxiliary battery to any terminal other than terminal 2 to avoid damaging the pulse sensor inside the motor.



b.

Connect a negative (-) lead from the auxiliary battery to connector terminals 1 and 7 or 10.


c.

Check that the motor gear rotates smoothly as follows:

OK:
Measurement Condition Specified Condition
1.

Connect a positive (+) lead from the auxiliary battery to terminal 2, connect a negative (-) lead from the auxiliary battery to terminal 1, and keep them connected for 3 seconds or more.

2.

With terminals 2 and 1 connected, connect a negative (-) lead from the auxiliary battery to terminal 10.


Motor gear rotates clockwise
1.

Connect a positive (+) lead from the auxiliary battery to terminal 2, connect a negative (-) lead from the auxiliary battery to terminal 1, and keep them connected for 3 seconds or more.

2.

With terminals 2 and 1 connected, connect a negative (-) lead from the auxiliary battery to terminal 7.


Motor gear rotates counterclockwise


If the result is not as specified, replace the power window regulator motor assembly LH.


CAUTION:

Initialize the power window control system after installing the rear door window regulator assembly.



Hide 85710F 2.INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

a.
B564596C01
1.438,1.792 2.125,1.771 true 0.385,2.906 0.698,3.063 0.313,0.156 10 false *a 0.094,2.063 0.406,2.219 0.313,0.156 10 false *b 0.417,2.51 0.729,2.667 0.313,0.156 10 false *c 2.167,1.688 2.479,1.844 0.313,0.156 10 false *d
*a Component without harness connected
(Power Window Regulator Motor Assembly RH)
*b Clockwise
*c Counterclockwise
*d Motor gear


Connect a positive (+) lead from the auxiliary battery to connector terminal 2.

NOTICE:

Do not connect a positive (+) lead from the auxiliary battery to any terminal other than terminal 2 to avoid damaging the pulse sensor inside the motor.



b.

Connect a negative (-) lead from the auxiliary battery to connector terminals 1 and 7 or 10.


c.

Check that the motor gear rotates smoothly as follows:

OK:
Measurement Condition Specified Condition
1.

Connect the positive (+) lead from the auxiliary battery to terminal 2, connect a negative (-) lead from the auxiliary battery to terminal 1, and keep them connected for 3 seconds or more.

2.

With terminals 2 and 1 connected, connect a negative (-) lead from the auxiliary battery to terminal 10.


Motor gear rotates counterclockwise
1.

Connect a positive (+) lead from the auxiliary battery to terminal 2, connect a negative (-) lead from the auxiliary battery to terminal 1, and keep them connected for 3 seconds or more.

2.

With terminals 2 and 1 connected, connect a negative (-) lead from the auxiliary battery to terminal 7.


Motor gear rotates clockwise


If the result is not as specified, replace the power window regulator motor assembly RH.


CAUTION:

Initialize the power window control system after installing the rear door window regulator assembly.