Home › General › MAINTENANCE › REAR TURN SIGNAL LIGHT BULB
RM37A0E _V1 General _086848 MAINTENANCE _0416702 REAR TURN SIGNAL LIGHT BULB A

MAINTENANCE  REAR TURN SIGNAL LIGHT BULB  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 81550L 1.INSTALL REAR TURN SIGNAL LIGHT BULB

a.

Install the rear turn signal light bulb to the rear turn signal light socket.


b.
E430140C01
0,0 0,0 false
V113147

Install in this Direction


Turn the rear turn signal light socket with the rear turn signal light bulb as shown in the illustration to install them as a unit.


Hide 2.INSTALL REAR COMBINATION LIGHT SUB-ASSEMBLY

a.
E430178C01
0.896,1.854 1.563,1.188 true 0.313,1.292 0.979,0.625 true 1.531,1.573 2.542,0.927 2.542,0.927 1.833,1.542 true 0.76,1.854 1.073,2.01 0.313,0.156 10 true *a 0.208,1.281 0.521,1.438 0.313,0.156 10 true *b 2.563,0.844 2.875,1 0.313,0.156 10 true *b
*a Pin
*b Guide
V113147

Install in this Direction


Engage the 3 guides and pin to temporarily install the rear combination light sub-assembly as shown in the illustration.


b.

Install the rear combination light sub-assembly with the 2 screws.


c.

Remove the protective tape.


Hide 81498 3.INSTALL REAR COMBINATION LIGHT COVER