CUSTOMIZE HEADUP DISPLAY SYSTEM
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
The following items can be customized.
Customizing with the GTS
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Customize Setting / Display.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Projection Adjustment (Tilt) | Headup display image calibration
(Tilt calibration) |
Default | $03:Clockwise (+3),$02:Clockwise (+2),$01:Clockwise (+1),$00:Default,$FF:Anti-Clockwise (-1),$FE:Anti-Clockwise (-2),$FD:Anti-Clockwise (-3) | Meter mirror sub-assembly |
| Projection Adjustment (Keystone) | Headup display image calibration
(Keystone calibration) |
Default | $03:Narrow Top (+3),$02:Narrow Top (+2),$01:Narrow Top (+1),$00:Default,$FF:Narrow Bottom (-1),$FE:Narrow Bottom (-2),$FD:Narrow Bottom (-3) | Meter mirror sub-assembly |
| Projection Adjustment (Distortion) | Headup display image calibration
(Distortion calibration) |
Default | $03:Convex (+3),$02:Convex (+2),$01:Convex (+1),$00:Default,$FF:Concave (-1),$FE:Concave (-2),$FD:Concave (-3) | Meter mirror sub-assembly |
| Master Caution Display Function | Master warning display setting for headup display | ON | $00:OFF,$01:ON | Meter mirror sub-assembly |
| Traffic Sign Recognition Animation Function | Traffic sign recognition display setting for headup display | ON | $00:OFF,$01:ON | Meter mirror sub-assembly |
| Memory Call Link Function | Memory call link setting for headup display image position | ON | $00:OFF,$01:ON | Meter mirror sub-assembly |
| Seat Switch Link Function | Power seat switch link setting for headup display image position | ON | $00:OFF,$01:ON | Meter mirror sub-assembly |
| ECO Drive Indicator Zone Display Function | ECO driving indicator function setting for headup display | ON | $00:OFF,$01:ON | Meter mirror sub-assembly |
Depending on the specifications of the vehicle, some items may not be displayed.
Customizing with the multi-information display
Turn the ignition switch to ON.
Select the settings tab on the multi-information display.
Select the setting by referring to the table below.
As some values cannot be selected when the vehicle is being driven, perform the procedure with the vehicle stopped.
Depending on the specifications of the vehicle, some items may not be displayed.
| Display | Description | Setting | ECU | ||
|---|---|---|---|---|---|
| - | Headup display system setting | ON/OFF | Meter mirror sub-assembly | ||
| "HUD Brightness/Position" | Brightness and position setting for headup display | - | |||
| "HUD Driving Support" | "Tachometer Settings" | Display setting for headup display | "Blank/Hybrid System/Eco Indicator/Tachometer" | ||
| "Navigation" | Display setting for headup display | ON/OFF | |||
| "Driving Assist" | Display setting for headup display | ON/OFF | |||
| "Compass" | Display setting for headup display | ON/OFF | |||
| "Audio" | Display setting for headup display | ON/OFF | |||
| "HUD Rotation" | Headup display image calibration (rotation calibration) | - | |||