87201F
1.REMOVE NO. 3 AIR DUCT SUB-ASSEMBLY
| *a | View A |
|
Front |
Remove the screw.
Disengage the 3 claws to remove the No. 3 air duct sub-assembly.
Be careful not to deform or damage the lower heater case of the air conditioner unit assembly when removing the No. 3 air duct sub-assembly.
88897P
2.REMOVE ASPIRATOR
Disengage the guide and 2 claws to remove the aspirator.
87130D
3.REMOVE BLOWER ASSEMBLY
88650N
4.REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY
|
Remove in this Direction |
Disconnect the connector.
Remove the screw.
Disengage the guide to remove the air conditioning amplifier assembly as shown in the illustration.
82210K
5.REMOVE AIR CONDITIONING HARNESS ASSEMBLY
Disconnect each connector.
Disengage each clamp to remove the air conditioning harness assembly.
87114B
6.REMOVE HEATER COVER
|
Remove in this Direction |
Remove the screw.
Remove the heater cover as shown in the illustration.
88539J
7.REMOVE DRAIN COOLER HOSE
Remove the drain cooler hose.
87050C
8.REMOVE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
Remove the 3 screws and No. 1 air conditioning radiator damper servo sub-assembly.
87050D
9.REMOVE NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
Remove the 2 screws and No. 2 air conditioning radiator damper servo sub-assembly.
87128
10.REMOVE HEATER GROMMET
Remove the heater grommet.
87124B
11.REMOVE HEATER CLAMP
Disengage the 3 claws to remove the heater clamp.
87107A
12.REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY
|
Remove in this Direction |
Remove the heater radiator unit sub-assembly as shown in the illustration.
Prepare a drain pan or cloth in case the coolant leaks.
88899L
13.REMOVE COOLING UNIT PARTS
Remove the cooling unit parts.
14.REMOVE COOLER EXPANSION VALVE
Using a 4 mm hexagon socket wrench, remove the 2 hexagon bolts and cooler expansion valve.
Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.
88501
15.REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
Remove the 2 screws.
Disengage the 10 claws to remove the upper heater case with No. 1 cooler evaporator sub-assembly from the lower heater case.
Disengage the 2 clamps.
Remove the No. 1 cooler evaporator sub-assembly with No. 1 cooler thermistor from the upper heater case.
88625
16.REMOVE NO. 1 COOLER THERMISTOR