88625
1.INSTALL NO. 1 COOLER THERMISTOR
88501
2.INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
Install the No. 1 cooler evaporator sub-assembly with No. 1 cooler thermistor to the upper heater case.
Engage the 2 clamps.
Engage the 10 claws to install the upper heater case with No. 1 cooler evaporator sub-assembly to the lower heater case.
Install the 2 screws.
3.INSTALL COOLER EXPANSION VALVE
Sufficiently apply compressor oil to 2 new O-rings and the fitting surfaces of the No. 1 cooler evaporator sub-assembly.
ND-OIL 11 or equivalent
Install the 2 O-rings to the No. 1 cooler evaporator sub-assembly.
Keep the O-rings and O-ring fitting surfaces free of foreign matter.
Using a 4 mm hexagon socket wrench, install the cooler expansion valve with the 2 hexagon bolts.
88899L
4.INSTALL COOLING UNIT PARTS
Install the cooling unit parts.
87107A
5.INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY
|
Install in this Direction |
Install the heater radiator unit sub-assembly as shown in the illustration.
87124B
6.INSTALL HEATER CLAMP
Engage the 3 claws to install the heater clamp.
87128
7.INSTALL HEATER GROMMET
| *a | Reference Point |
Install the heater grommet as shown in the illustration.
Install the heater grommet with the arrow facing up.
87050D
8.INSTALL NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
| *a | Link |
Connect the 3 links of the No. 2 air conditioning radiator damper servo sub-assembly to the 3 links of the air conditioning radiator assembly as shown in the illustration.
Install the No. 2 air conditioning radiator damper servo sub-assembly with the 2 screws.
87050C
9.INSTALL NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
Align each gear on the air conditioning radiator assembly as shown in the illustration, and then check that the gears of the No. 1 air conditioning radiator damper servo sub-assembly are aligned as shown in the illustration.
| *a | Reference Point | - | - |
| *a | Reference Point |
Using the reference points, install the No. 1 air conditioning radiator damper servo sub-assembly with the 3 screws.
88539J
10.INSTALL DRAIN COOLER HOSE
| *a | Hose Notch |
| *b | Rib |
Align the hose notch with the rib as shown in the illustration and install the drain cooler hose.
87114B
11.INSTALL HEATER COVER
|
Install in this Direction |
Install the heater cover as shown in the illustration.
Install the screw.
82210K
12.INSTALL AIR CONDITIONING HARNESS ASSEMBLY
Engage each clamp.
Connect each connector to install the air conditioning harness assembly.
88650N
13.INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY
|
Install in this Direction |
Engage the guide to temporarily install the air conditioning amplifier assembly as shown in the illustration.
Install the air conditioning amplifier assembly with the screw.
Connect the connector.
87130D
14.INSTALL BLOWER ASSEMBLY
88897P
15.INSTALL ASPIRATOR
Engage the 2 claws and guide to install the aspirator.
87201F
16.INSTALL NO. 3 AIR DUCT SUB-ASSEMBLY
Engage the 3 claws.
Install a new No. 3 air duct sub-assembly with the screw.