Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT
RM37A0E _58 Vehicle Interior _086896 HEATING / AIR CONDITIONING _0417364 BLOWER UNIT A

HEATING / AIR CONDITIONING  BLOWER UNIT  REASSEMBLY  


PROCEDURE

Hide 87130K 1.INSTALL NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY

a.
E430657C01
0.823,0.313 1.302,0.479 true 2.583,0.833 2.844,0.646 true 0.656,0.198 0.854,0.385 0.198,0.188 10 true *a 2.854,0.531 3.052,0.719 0.198,0.188 10 true *a
*a Link


Connect the 2 links of the blower assembly to the 2 grooves on the plate of the No. 1 blower damper servo sub-assembly as shown in the illustration.


b.

Install the No. 1 blower damper servo sub-assembly with the 2 screws.


Hide 87103B 2.INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY

a.
E430655

Install the blower motor with fan sub-assembly with the 3 screws.

NOTICE:

Replace the blower motor with fan sub-assembly if it has been dropped or subjected to a severe impact.



Hide 87139C 3.INSTALL CLEAN AIR FILTER

a.

Engage the 2 guides on the cutout side of the air filter case and then engage the 2 guides as shown in the illustration to install the clean air filter.

E430658C01
4.688,2.688 4.688,2.073 true 2.146,4.281 2.563,3.865 false 4.604,2.698 4.917,2.854 0.313,0.156 10 false *a 2.573,3.75 2.885,3.906 0.313,0.156 10 false *b
*a Cutout *b Rib
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


NOTICE:
·

Make sure that the "UP" marks are facing the correct direction before installing the clean air filter.

·

Make sure that there is no clearance between the clean air filter and air filter case and that the clean air filter is not deformed.




b.
E430650C01
0,0 0,0 false
V113147

Install in this Direction


Install the air filter sub-assembly as shown in the illustration.

NOTICE:

Make sure that the "UP" mark is facing the correct direction before installing the air filter sub-assembly.



Hide 88899M 4.INSTALL AIR FILTER COVER PLATE

a.
E430652C01
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Engage the 2 guides and claw as indicated by the arrows, in the order shown in the illustration to install the air filter cover plate.