88474
1.INSTALL COOLER DRYER
| *a | Modulator |
Using pliers, install a new cooler dryer to the modulator.
for Gasoline Model:
Sufficiently apply compressor oil to 3 O-rings and the fitting surfaces of a new cap.
ND-OIL 12 or equivalent
Keep the O-rings and O-ring fitting surfaces free from dirt or foreign matter.
for HV Model:
Sufficiently apply compressor oil to the O-ring and the fitting surfaces of a new cap.
ND-OIL 11 or equivalent
Keep the O-rings and O-ring fitting surfaces free from dirt or foreign matter.
| *a | Modulator |
Using a 14 mm straight hexagon, install the cap to the modulator.