Home › Vehicle Interior › HEATING / AIR CONDITIONING › ROOM TEMPERATURE SENSOR (for Rear)
RM37A0E _58 Vehicle Interior _086896 HEATING / AIR CONDITIONING _0417374 ROOM TEMPERATURE SENSOR(for Rear) G

HEATING / AIR CONDITIONING  ROOM TEMPERATURE SENSOR(for Rear)  INSPECTION  


PROCEDURE

Hide 88625T 1.INSPECT COOLER (NO. 2 ROOM TEMP. SENSOR) THERMISTOR

a.
E430746C01
1.719,3.292 1.958,3 false 0.208,0.188 0.521,0.344 0.313,0.156 10 false *a 0.094,3 0.406,3.156 0.313,0.156 10 false *b 1.76,4.448 2.073,4.604 0.313,0.156 10 false *c 1.99,2.896 2.302,3.052 0.313,0.156 10 false *d 0.979,4.219 1.271,4.438 0.292,0.219 10 false (68) 0.49,4.219 0.781,4.438 0.292,0.219 10 false (50) 1.5,4.229 1.792,4.448 0.292,0.219 10 false (86) 1.969,4.219 2.344,4.469 0.375,0.25 10 false (104) 2.49,4.229 2.865,4.479 0.375,0.25 10 false (122) 2.979,4.24 3.313,4.49 0.333,0.25 10 false (140)
*a Component without harness connected
(Cooler (No. 2 Room Temp. Sensor) Thermistor))
*b Resistance (kΩ)
*c temperature (°C (°F))
*d Allowable Range


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 10°C (50°F) 3.00 to 3.73 kΩ
15°C (59°F) 2.45 to 2.88 kΩ
20°C (68°F) 1.95 to 2.30 kΩ
25°C (77°F) 1.60 to 1.80 kΩ
30°C (86°F) 1.28 to 1.47 kΩ
35°C (95°F) 1.00 to 1.22 kΩ
40°C (104°F) 0.80 to 1.00 kΩ
45°C (113°F) 0.65 to 0.85 kΩ
50°C (122°F) 0.50 to 0.70 kΩ
55°C (131°F) 0.44 to 0.60 kΩ
60°C (140°F) 0.36 to 0.50 kΩ


NOTICE:
·

Hold the sensor only by its connector. Touching the sensing portion may change the resistance value.

·

When measuring, the sensor temperature must be the same as the ambient temperature.



HINT:

As the temperature increases, the resistance decreases (see the graph).


If the result is not as specified, replace the cooler (No. 2 room temp. sensor) thermistor.