Home › Vehicle Interior › HEATING / AIR CONDITIONING › FRONT EVAPORATOR TEMPERATURE SENSOR (for HV Model)
RM37A0E _58 Vehicle Interior _086896 HEATING / AIR CONDITIONING _0417377 FRONT EVAPORATOR TEMPERATURE SENSOR(for HV Model) G

HEATING / AIR CONDITIONING  FRONT EVAPORATOR TEMPERATURE SENSOR(for HV Model)  INSPECTION  


PROCEDURE

Hide 88625 1.INSPECT NO. 1 COOLER THERMISTOR

a.

Measure the resistance according to the value(s) in the table below.

E431767C01
5.396,1.49 5.802,1.323 false 0.573,1.667 0.313,1.667 false 1.75,0.344 2.063,0.583 0.313,0.24 10 false *a 0.094,1.552 0.385,1.76 0.292,0.208 10 false *b 3.969,1.24 4.271,1.427 0.302,0.188 10 false *c 5.51,2.594 5.823,2.792 0.313,0.198 10 false *d 5.823,1.219 6.115,1.427 0.292,0.208 10 false *e 4.427,2.396 4.792,2.635 0.365,0.24 10 false (14) 4.969,2.396 5.333,2.635 0.365,0.24 10 false (32) 5.51,2.396 5.875,2.635 0.365,0.24 10 false (50) 6.042,2.396 6.406,2.635 0.365,0.24 10 false (68) 6.573,2.396 6.938,2.635 0.365,0.24 10 false (86)
*a Component without harness connected
(No. 1 Cooler Thermistor)
*b Sensing Portion
*c Resistance (kΩ) *d Temperature (°C (°F))
*e Allowable Range - -


Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 -10°C (14°F) 7.30 to 9.10 kΩ
-5°C (23°F) 5.65 to 6.95 kΩ
0°C (32°F) 4.40 to 5.35 kΩ
5°C (41°F) 3.40 to 4.15 kΩ
10°C (50°F) 2.70 to 3.25 kΩ
15°C (59°F) 2.14 to 2.58 kΩ
20°C (68°F) 1.71 to 2.05 kΩ
25°C (77°F) 1.38 to 1.64 kΩ
30°C (86°F) 1.11 to 1.32 kΩ


NOTICE:
·

Hold the sensor only by its connector. Touching the sensing portion may change the resistance value.

·

When measuring, the sensor temperature must be the same as the ambient temperature.



HINT:

As the temperature increases, the resistance decreases (see the graph).


If the resistance is not as specified, replace the No. 1 cooler thermistor.