Home › Vehicle Interior › HEATING / AIR CONDITIONING › REAR EVAPORATOR TEMPERATURE SENSOR
RM37A0E _58 Vehicle Interior _086896 HEATING / AIR CONDITIONING _0417379 REAR EVAPORATOR TEMPERATURE SENSOR G

HEATING / AIR CONDITIONING  REAR EVAPORATOR TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 82210L 1.INSPECT NO. 2 AIR CONDITIONING HARNESS ASSEMBLY

a.

Measure the resistance according to the value(s) in the table below.

E285448C01
5.354,1.5 5.771,1.083 false 0.75,1 0.906,1 0.906,1 0.906,0.646 false 2.344,2.125 2.542,1.615 false 3,2.115 2.677,1.625 false 0.438,0.344 0.75,0.5 0.313,0.156 10 false *a 0.563,0.917 0.875,1.073 0.313,0.156 10 false *b 4.292,0.135 4.604,0.292 0.313,0.156 10 false *c 5.521,2.573 5.833,2.729 0.313,0.156 10 false *d 5.833,0.906 6.146,1.063 0.313,0.156 10 false *e 2.323,2.135 2.635,2.292 0.313,0.156 10 false + 3.01,2.135 3.323,2.292 0.313,0.156 10 false -
*a Component without harness connected
(No. 2 Air Conditioning Harness Assembly)
*b Sensing Portion
*c Resistance (kΩ) *d Temperature (°C (°F))
*e Allowable Range - -


Standard Resistance:
Tester Connection Condition Specified Condition
7 (-) - 8 (+) -10°C (14°F) 7.30 to 9.10 kΩ
-5°C (23°F) 5.65 to 6.95 kΩ
0°C (32°F) 4.40 to 5.35 kΩ
5°C (41°F) 3.40 to 4.15 kΩ
10°C (50°F) 2.70 to 3.25 kΩ
15°C (59°F) 2.14 to 2.58 kΩ
20°C (68°F) 1.71 to 2.05 kΩ
25°C (77°F) 1.38 to 1.64 kΩ
30°C (86°F) 1.11 to 1.32 kΩ


NOTICE:
·

Hold the sensor only by its connector. Touching the sensing portion may change the resistance value.

·

When measuring, the sensor temperature must be the same as the ambient temperature.



HINT:

As the temperature increases, the resistance decreases (see the graph).


If the result is not as specified, replace the No. 2 air conditioning harness assembly.