87346K
1.INSPECT PTC HEATER RELAY (w/ PTC Heater)
| *a | Component without harness connected
(PTC Heater Relay) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 5 | Battery voltage is not applied between terminals 1 and 2 | 10 kΩ or higher |
| 3 - 5 | Battery voltage is applied between terminals 1 and 2 | Below 1 Ω |
If the result is not as specified, replace the PTC heater relay.
85934
2.INSPECT MAGNET-CLUTCH RELAY (for Gasoline Model)
| *a | Component without harness connected
(Magnet-clutch Relay) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 5 | Battery voltage is not applied between terminals 1 and 2 | 10 kΩ or higher |
| 3 - 5 | Battery voltage is applied between terminals 1 and 2 | Below 1 Ω |
If the result is not as specified, replace the magnet-clutch relay.