Home › General › MAINTENANCE › AIR CONDITIONING FILTER
RM37A0E _V1 General _086848 MAINTENANCE _0417386 AIR CONDITIONING FILTER A

MAINTENANCE  AIR CONDITIONING FILTER  REMOVAL  


PROCEDURE

Hide 55501A 1.REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY

a.
E430778C01
1.969,2.615 2.156,2.615 true 2.167,2.542 2.365,2.74 0.198,0.198 10 true *1 0.219,1.563 0.406,1.771 0.188,0.208 10 true B 2.906,1.594 3.094,1.802 0.188,0.208 10 true A
*1 Glove Compartment Door Stopper Sub-assembly


Disengage the claw to disconnect the glove compartment door stopper sub-assembly.


b.

Slightly bend stoppers (A) and (B) in the directions indicated by the arrows shown in the illustration and open the glove compartment door assembly until the stoppers are released.


c.

Open the glove compartment door assembly to approximately 75° from its closed position. Pull it horizontally in the direction indicated by the arrow shown in the illustration to disengage the 2 hinges and remove the glove compartment door assembly.

E430780C01
4.51,1.052 4.823,1.208 0.313,0.156 10 false *a
*a 75° - -
V113147

Remove in this Direction - -


NOTICE:

Pulling the glove compartment door assembly upward when removing it will cause the hinges to deform. Be sure to pull out the glove compartment door assembly horizontally.



Hide 88899M 2.REMOVE AIR FILTER COVER PLATE

a.
E430784C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Disengage the claw and 2 guides as shown in the illustration to remove the air filter cover plate.


Hide 87139C 3.REMOVE CLEAN AIR FILTER

a.
E430783C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the air filter sub-assembly as shown in the illustration.


b.
E430654

Disengage the 4 guides to remove the clean air filter from the air filter case.