73480A
1.INSPECT REAR SEAT INNER BELT ASSEMBLY LH
| *a | Component without harness connected
(Rear Seat Inner Belt Assembly LH) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 5 | Rear No. 1 LH seat belt unfastened | Below 1 Ω |
| Rear No. 1 LH seat belt fastened | 10 kΩ or higher |
If the result is not as specified, replace the rear seat inner belt assembly LH.