Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT INNER BELT ASSEMBLY (for 60/40 Split Seat Type RH Side) › 2020.02–2020.11
RM37A0E _58 Vehicle Interior _086895 SEAT BELT _0417483 REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type RH Side) G

SEAT BELT  REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type RH Side)  INSPECTION  


PROCEDURE

Hide 73380X 1.INSPECT REMOVE REAR SEAT INNER BELT ASSEMBLY RH

a.
B561013C01
0.146,0.115 0.521,0.708 0.375,0.594 10 false *a
*a Component without harness connected
(Rear Seat Inner Belt Assembly RH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 4 Rear No. 1 RH seat belt unfastened Below 1 Ω
Rear No. 1 RH seat belt fastened 10 kΩ or higher


If the result is not as specified, replace the rear seat inner belt assembly RH.