Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT OUTER BELT ASSEMBLY
RM37A0E _58 Vehicle Interior _086895 SEAT BELT _0417486 REAR NO. 1 SEAT OUTER BELT ASSEMBLY G

SEAT BELT  REAR NO. 1 SEAT OUTER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 73370E 1.INSPECT REAR SEAT OUTER BELT ASSEMBLY LH

a.
B564822C01
1.813,1.823 2.563,1.896 2.563,1.896 2.323,1.615 false 2.604,1.771 2.917,1.927 0.313,0.156 10 false *a 2.156,0.125 2.469,0.281 0.313,0.156 10 false *b 0.552,0.875 0.865,1.031 0.313,0.156 10 false *c 1.26,0.396 1.573,0.552 0.313,0.156 10 false *d
*a Retractor
*b Unlock
*c Lock
*d 45°


Before installing the rear seat outer belt assembly, check the ELR function.

NOTICE:

Do not disassemble the retractor.


i.

When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

If the result is not as specified, replace the rear seat outer belt assembly.