73350
1.INSPECT REAR NO. 1 SEAT CENTER LAP TYPE BELT ASSEMBLY
| *a | Retractor |
| *b | 0° |
| *c | 21° |
| *d | 37° |
| *e | Unlock |
| *f | Lock |
Before installing the rear No. 1 center seat lap type belt assembly, check the ELR function.
Do not disassemble the retractor.
When the inclination of the retractor is between 21° and 37°, check that the belt can be pulled from the retractor. When the inclination of the retractor is less 21° or more than 37°, check that the belt locks.
If the result is not as specified, replace the rear No. 1 center seat lap type belt assembly.