Home › Vehicle Exterior › HORN › HORN
RM37A0E _59 Vehicle Exterior _086902 HORN _0417491 HORN G

HORN  HORN  INSPECTION  


PROCEDURE

Hide 86510 1.INSPECT HIGH PITCHED HORN ASSEMBLY

a.
B560969C01
1.24,0.208 1.583,0.25 false 1.479,1.073 1.938,0.885 false 0.094,0.083 0.417,0.302 0.323,0.219 10 false *a 1.073,0.094 1.427,0.385 0.354,0.292 10 false *b 1.969,0.74 2.219,1.052 0.25,0.313 10 false 1
*a Component without harness connected
(High Pitched Horn Assembly)
*b Body Ground


Apply auxiliary battery voltage and check the operation of the high pitched horn assembly according to the table below.

OK:
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Body ground
Horn sounds


If the result is not as specified, replace the high pitched horn assembly.


Hide 86520 2.INSPECT LOW PITCHED HORN ASSEMBLY

a.
B560970C01
1.156,0.25 1.448,0.271 false 1.354,1.073 1.823,0.781 false 0.083,0.125 0.417,0.396 0.333,0.271 10 false *a 0.99,0.135 1.344,0.375 0.354,0.24 10 false *b 1.844,0.635 2.073,0.927 0.229,0.292 10 false 1
*a Component without harness connected
(Low Pitched Horn Assembly)
*b Body Ground


Apply auxiliary battery voltage and check the operation of the low pitched horn assembly according to the table below.

OK:
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Body ground
Horn sounds


If the result is not as specified, replace the low pitched horn assembly.