Home › Engine / Hybrid System › 2GR-FKS (FUEL) › FUEL PRESSURE SENSOR
RM37A0E _51 Engine / Hybrid System _086852 2GR-FKS FUEL _0417510 FUEL PRESSURE SENSOR G

2GR-FKS FUEL  FUEL PRESSURE SENSOR  INSPECTION  


PROCEDURE

Hide 23800 1.INSPECT FUEL PRESSURE SENSOR (FUEL DELIVERY PIPE WITH SENSOR ASSEMBLY)

NOTICE:
·

Do not remove the fuel pressure sensor from the fuel delivery pipe with sensor assembly.

·

If the fuel pressure sensor is removed, replace the fuel pressure sensor (fuel delivery pipe with sensor assembly) with a new one.



a.

Check the fuel pressure sensor (fuel delivery pipe with sensor assembly) output voltage.

i.
A326512C03
1.802,0.771 1.344,0.333 1.344,0.333 1.177,0.333 true 1.99,0.771 2.406,0.333 2.406,0.333 2.573,0.333 true 0.135,0.135 0.448,0.292 0.313,0.156 10 false *a 1.521,1.844 1.833,2 0.313,0.156 10 false *b 0.99,0.26 1.302,0.458 0.313,0.198 10 false E2 2.625,0.271 2.938,0.469 0.313,0.198 10 false VC
*a Component without harness connected
(Fuel Pressure Sensor (Fuel Delivery Pipe with Sensor Assembly))
*b Voltage Applied between Terminals


Apply 5 V between terminals 1 (VC) and 3 (E2).

NOTICE:
·

Be careful when connecting the leads, as the fuel pressure sensor (fuel delivery pipe with sensor assembly) may be damaged if the leads are connected to the wrong terminals.

·

Do not apply more than 6 V to terminals 1 (VC) or 3 (E2).



HINT:

If a stable power supply is not available, connect 4 nickel-metal hydride batteries (1.2 V each) or equivalent in series.



ii.
A326513C06
1.615,1.156 1.313,1.667 1.313,1.667 1.313,1.833 true 1.729,1.167 1.99,1.667 1.99,1.667 1.99,1.833 true 0.125,0.125 0.438,0.281 0.313,0.156 10 false *a 1.25,1.865 1.563,2.063 0.313,0.198 10 false E2 1.885,1.865 2.198,2.063 0.313,0.198 10 false PFL
*a Component without harness connected
(Fuel Pressure Sensor (Fuel Delivery Pipe with Sensor Assembly))


Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
2 (PFL) - 3 (E2) Pressure not applied to fuel pressure sensor (fuel delivery pipe with sensor assembly) Approximately 0.57 to 0.95 V*


*: The output voltage changes depending on the voltage applied to the terminals.

If the result is not as specified, replace the fuel pressure sensor (fuel delivery pipe with sensor assembly).