Home › General › MAINTENANCE › REAR WIPER RUBBER
RM37A0E _V1 General _086848 MAINTENANCE _0417553 REAR WIPER RUBBER A

MAINTENANCE  REAR WIPER RUBBER  INSTALLATION  


PROCEDURE

Hide 85214R 1.INSTALL REAR WIPER RUBBER

a.
E430736C01
0,0 0,0 false
V113147

Install in this Direction


Install the 2 rear wiper rubber backing plates to the rear wiper rubber as shown in the illustration.

NOTICE:

Install the backing plates facing the correct direction.



b.

Insert the rear wiper rubber with the 2 rear wiper rubber backing plates through the second claw from the front of the rear wiper blade and then push it through each claw until the rear claw.

E439556C01
3.604,2.427 4.031,2.302 true 0.76,1.771 1.177,1.604 true 0.594,1.719 0.906,1.917 0.313,0.198 10 false *a 3.458,2.323 3.771,2.521 0.313,0.198 10 false *b
*a Second Claw *b Stopper
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)
V113149

Install in this Direction (3) - -



c.

After pushing the rear wiper rubber through the rear claw, pull it slightly over the rear stopper.


d.

Slide the rear wiper rubber through the front claw.


e.
E431020C01
0.354,0.313 0.667,0.51 0.313,0.198 10 false *a 1.042,0.313 1.354,0.51 0.313,0.198 10 false *b
*a Correct
*b Incorrect


Securely engage the rear wiper blade claw to the rear wiper rubber groove as shown in the illustration.

HINT:
·

If the front claw of the rear wiper blade is not in the rear wiper rubber groove, grasp the rear wiper rubber and slide it up and down multiple times to insert the claw into the groove.

·

Applying a small amount of window washer fluid to the rear wiper rubber can make it easier to insert the claw into the groove.




Hide 85242 2.INSTALL REAR WIPER BLADE

a.
E431021C01
0,0 0,0 false
V113147

Install in this Direction


Push the rear wiper blade as shown in the illustration to install it to the rear wiper arm.


b.
E431022

Engage the claw to install the rear wiper blade as shown in the illustration.

NOTICE:

Be careful not to damage the claw.



c.
E431023

Lower the rear wiper arm and blade assembly as shown in the illustration.


d.
E435534

Engage the 2 claws to connect the rear wiper arm head cap as shown in the illustration.