Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER MOTOR
RM37A0E _59 Vehicle Exterior _086901 WIPER / WASHER _0417559 REAR WIPER MOTOR G

WIPER / WASHER  REAR WIPER MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85110R 1.INSPECT REAR WIPER MOTOR ASSEMBLY

a.
E431067C01
1.615,2.583 1.948,2.333 true 2,2.219 2.208,2.417 0.208,0.198 10 true *a 0.5,2.271 0.708,2.469 0.208,0.198 10 true A 0.49,2.542 0.698,2.74 0.208,0.198 10 true A
*a Alignment Mark


Operate the rear wiper motor assembly.


b.

Stop the rear wiper motor assembly operation.


c.

Check the automatic stop position.

HINT:

After the rear wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


Standard Clearance:
Area Measurement
A 10.0 mm (0.394 in.)


OK:

The rear wiper stops at the position shown in the illustration.