Home › Vehicle Exterior › WIPER / WASHER › WIPER SWITCH › 2020.02–2020.11
RM37A0E _59 Vehicle Exterior _086901 WIPER / WASHER _0417562 WIPER SWITCH G

WIPER / WASHER  WIPER SWITCH  INSPECTION  


PROCEDURE

Hide 84650 1.INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY

a.
E435566C01
1.896,4.094 1.677,3.594 true 2.094,4 1.677,3.5 true 2.219,2.792 1.667,3.375 true 1.927,2.719 1.635,3.219 true 1.323,1.667 0.646,2.052 true 1.469,1.667 1.177,2.042 true 1.635,1.656 1.615,2.042 true 1.792,1.656 1.99,2.01 true 1.958,1.656 2.417,2.042 true 2.104,1.656 2.635,1.948 true 2.323,1.594 2.792,1.552 true 1.802,1.333 2.688,0.781 true 1.656,1.323 2.479,0.521 true 1.49,1.333 0.875,0.531 true 1.333,1.344 0.635,0.833 true 1.854,4.115 2.167,4.313 0.313,0.198 10 false P1 2.135,3.969 2.448,4.167 0.313,0.198 10 false P2 2.26,2.698 2.573,2.896 0.313,0.198 10 false P3 1.958,2.615 2.271,2.813 0.313,0.198 10 false P4 0.573,0.427 0.938,0.625 0.365,0.198 10 false +1R 0.323,0.729 0.656,0.927 0.333,0.198 10 false C1R 2.542,0.427 2.875,0.625 0.333,0.198 10 false E 2.75,0.688 3.083,0.885 0.333,0.198 10 false VR 2.844,1.469 3.177,1.667 0.333,0.198 10 false WR 2.708,1.865 3.292,2.073 0.583,0.208 10 false W_OFF 2.396,2.052 2.667,2.25 0.271,0.198 10 false +1 1.938,2.042 2.208,2.24 0.271,0.198 10 false +2 1.521,2.063 1.792,2.26 0.271,0.198 10 false +S 0.979,2.073 1.417,2.271 0.438,0.198 10 false MIST 0.479,2.063 0.75,2.26 0.271,0.198 10 false WF 0.083,0.083 0.396,0.24 0.313,0.156 10 false *a 0.083,2.417 0.396,2.573 0.313,0.156 10 false *b
*a Component without harness connected
(Windshield Wiper Switch Assembly)
*b Windshield Wiper Switch Assembly
(Adjusting Ring Position)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Front Wiper Switch
Tester Connection Condition Specified Condition
14 (MIST) - 5 (E) MIST position Below 1 Ω
Except MIST position 10 kΩ or higher
10 (W_OFF) - 5 (E) OFF position Below 1 Ω
Except OFF position 10 kΩ or higher
13 (+S) - 5 (E) INT position*1 Below 1 Ω
AUTO position*2 Below 1 Ω
Except INT position 10 kΩ or higher
11 (+1) - 5 (E) LO position Below 1 Ω
Except LO position 10 kΩ or higher
12 (+2) - 5 (E) HI position Below 1 Ω
Except HI position 10 kΩ or higher

Front Washer Switch
Tester Connection Condition Specified Condition
15 (WF) - 5 (E) ON position Below 1 Ω
OFF position 10 kΩ or higher

Rear Wiper Switch
Tester Connection Condition Specified Condition
7 (C1R) - 5 (E) OFF position 10 kΩ or higher
6 (+1R) - 5 (E)
7 (C1R) - 5 (E) INT position Below 1 Ω
6 (+1R) - 5 (E) ON position

Rear Washer Switch
Tester Connection Condition Specified Condition
9 (WR) - 5 (E) ON position Below 1 Ω
OFF position 10 kΩ or higher

Intermittent Time Adjustment Switch*1
Tester Connection Condition Specified Condition
4 (VR) - 5 (E) P1 position 1102 to 1218 Ω
P2 position 570 to 630 Ω
P3 position 256.5 to 283.5 Ω
P4 position Below 1 Ω

Auto Sensitivity Adjustment Switch*2
Tester Connection Condition Specified Condition
4 (VR) - 5 (E) P1 position 1102 to 1218 Ω
P2 position 570 to 630 Ω
P3 position 256.5 to 283.5 Ω
P4 position Below 1 Ω


*1: w/o Auto Wiper System

*2: w/ Auto Wiper System


If the result is not as specified, replace the windshield wiper switch assembly.