85035
1.INSPECT WASHER NOZZLE SUB-ASSEMBLY
Operate the washer nozzle sub-assemblies and check the position that the washer fluid contacts the windshield.
Center of washer fluid contacts the windshield in the areas shown in the illustration.
| *a | Upper Limit | *b | Standard |
| *c | Lower Limit | - | - |
|
Measurement | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 153.8 mm (6.06 in.) | B | 25.2 mm (0.992 in.) |
| C | 109.1 mm (4.30 in.) | D | 169.7 mm (6.68 in.) |
If the result is not as specified, replace the washer nozzle sub-assembly.