Home › Engine / Hybrid System › CRUISE CONTROL › CAMERA HEATER
RM37A0E _51 Engine / Hybrid System _086858 CRUISE CONTROL _0417631 CAMERA HEATER A

CRUISE CONTROL  CAMERA HEATER  INSTALLATION  


PROCEDURE

Hide 86401 1.INSTALL FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY

NOTICE:
·
E430634C01
0,0 0,0 false
V100155

Inner Surface of Forward Recognition with Heater Hood Sub-assembly


Do not touch the inner surface of the forward recognition with heater hood sub-assembly.

·

Do not apply force to the heating element of the forward recognition with heater hood sub-assembly or an open circuit may result.



a.
E430638C01
0,0 0,0 false
V100155

Heater Area
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Engage the 2 guides and 2 claws as indicated by the arrows in the order shown in the illustration.

NOTICE:
·

Make sure that the 2 claws are engaged as shown in the illustration. Failure to do so may result in the malfunction of systems that use the forward recognition camera.

·

Do not apply force to the heating element of the forward recognition with heater hood sub-assembly or an open circuit may result.




b.
E430636C01
1.375,0.396 1.729,0.479 true 0.771,1.458 0.688,1.146 0.688,1.146 1.083,1.042 false 0.688,1.146 0.948,1.24 false 0.688,1.146 1.188,0.865 false 1.177,0.281 1.406,0.49 0.229,0.208 10 false *a 0.521,1.052 0.75,1.229 0.229,0.177 10 false *b 1.042,1.458 1.198,1.656 0.156,0.198 10 true 1 1.198,1.177 1.354,1.375 0.156,0.198 10 true 2 1.333,1.021 1.49,1.219 0.156,0.198 10 true 3 1.438,0.792 1.594,0.99 0.156,0.198 10 true 4 2,0.49 2.156,0.688 0.156,0.198 10 true 5
*a Clamp
*b Rib


Engage the clamp and 4 ribs to install the forward recognition with heater hood sub-assembly.

NOTICE:
·

As the No. 1 forward recognition cover cannot be installed correctly if the clamp and ribs are not engaged securely, make sure to engage each clamp and rib securely.

·

Do not forcibly pull the wire harness as it may become damaged.



HINT:

Engage the clamp and ribs in the order shown in the illustration.



c.

Connect the connector.


Hide 8646C 2.INSTALL FORWARD RECOGNITION CAMERA