When installing the name plates or emblem, heat the vehicle body using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 20 to 30 °C (68 to 86 °F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the vehicle body excessively.
75428
1.INSTALL NO. 2 FRONT DOOR NAME PLATE (for HV Model)
Clean the front door panel surface.
Using a heat light, heat the front door panel surface.
Remove any remaining double-sided tape from the front door panel.
Wipe off any tape adhesive residue with cleaner.
Install a new No. 2 front door name plate.
Using a heat light, heat the front door panel surface.
Remove the release paper from the No. 2 front door name plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 2 front door name plate as shown in the illustration.
| *a | Profile of Front Door Panel | *b | R End |
| *c | R End of Front Door Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 206.3 mm (8.12 in.) | B | 348.9 mm (1.14 ft.) |
| C | 183.1 mm (7.21 in.) | D | 185.7 mm (7.31 in.) |
Press the No. 2 front door name plate firmly to install it.
75427
2.INSTALL FRONT DOOR NAME PLATE (for HV Model)
Clean the front door panel surface.
Using a heat light, heat the front door panel surface.
Remove any remaining double-sided tape from the front door panel.
Wipe off any tape adhesive residue with cleaner.
Install the front door name plate as shown in the illustration.
Install a new front door name plate.
Using a heat light, heat the front door panel surface.
Remove the release paper from the front door name plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the front door name plate as shown in the illustration.
| *a | Profile of Front Door Panel | *b | R End |
| *c | R End of Front Door Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 190.3 mm (7.49 in.) | B | 340.4 mm (1.12 ft.) |
| C | 173.7 mm (6.84 in.) | D | 204.8 mm (8.06 in.) |
Press the front door name plate firmly to install it.
75441A
3.INSTALL NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE (for HV Model)
Clean the back door panel surface.
Using a heat light, heat the back door panel surface.
Remove any remaining double-sided tape from the back door panel.
Wipe off any tape adhesive residue with cleaner.
Install a new No. 1 luggage compartment door name plate.
Using a heat light, heat the back door panel surface.
Remove the release paper from the No. 1 luggage compartment door name plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 1 luggage compartment door name plate as shown in the illustration.
| *a | R End | *b | R End of Back Door Panel |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 44.7 mm (1.76 in.) | B | 23.2 mm (0.91 in.) |
| C | 28.8 mm (1.13 in.) | - | - |
Press the No. 1 luggage compartment door name plate firmly to install it.
75445A
4.INSTALL NO. 5 BACK DOOR NAME PLATE
Clean the back door panel surface.
Using a heat light, heat the back door panel surface.
Remove any remaining double-sided tape from the back door panel.
Wipe off any tape adhesive residue with cleaner.
Install a new No. 5 back door name plate.
Using a heat light, heat the back door panel surface.
Remove the release paper from the No. 5 back door name plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
for GLE Plate:
Install the No. 5 back door name plate as shown in the illustration.
| *a | R End | *b | R End of Back Door Panel |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 21.5 mm (0.846 in.) | B | 41.6 mm (1.64 in.) |
| C | 19.3 mm (0.760 in.) | - | - |
Press the No. 5 back door name plate firmly to install it.
for Limited Plate:
Install the No. 5 back door name plate as shown in the illustration.
| *a | R End | *b | R End of Back Door Panel |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 21.3 mm (0.839 in.) | B | 49.4 mm (1.94 in.) |
| C | 20.3 mm (0.799 in.) | - | - |
Press the No. 5 back door name plate firmly to install it.
75444
5.INSTALL NO. 4 LUGGAGE COMPARTMENT DOOR NAME PLATE (w/ AWD Plate)
Clean the back door panel surface.
Using a heat light, heat the back door panel surface.
Remove any remaining double-sided tape from the back door panel.
Wipe off any tape adhesive residue with cleaner.
Install a new No. 4 luggage compartment door name plate.
Using a heat light, heat the back door panel surface.
Remove the release paper from the No. 4 luggage compartment door name plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 4 luggage compartment door name plate as shown in the illustration.
| *a | R End | *b | R End of Back Door Panel |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 21.5 mm (0.846 in.) | B | 19.5 mm (0.768 in.) |
| C | 42.9 mm (1.69 in.) | - | - |
Press the No. 4 luggage compartment door name plate firmly to install it.
75442
6.INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
Clean the back door panel surface.
Using a heat light, heat the back door panel surface.
Remove any remaining double-sided tape from the back door panel.
Wipe off any tape adhesive residue with cleaner.
Install a new No. 2 luggage compartment door name plate.
Using a heat light, heat the back door panel surface.
Remove the release paper from the No. 2 luggage compartment door name plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 2 luggage compartment door name plate as shown in the illustration.
| *a | R End | *b | R End of Back Door Panel |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 16.1 mm (0.634 in.) | B | 28.4 mm (1.12 in.) |
| C | 21.1 mm (0.831 in.) | - | - |
Press the No. 2 luggage compartment door name plate firmly to install it.
75741E
7.INSTALL SYMBOL EMBLEM
Clean the back door panel surface.
Using a heat light, heat the back door panel surface.
Remove any remaining double-sided tape from the back door panel.
Wipe off any tape adhesive residue with cleaner.
Install a new symbol emblem.
Using a heat light, heat the back door panel surface.
Remove the release paper from the symbol emblem.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Engage the 2 pins and install the symbol emblem.
Press the symbol emblem to install it.