Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT DOOR WINDOW FRAME MOULDING
RM37A0E _59 Vehicle Exterior _086903 EXTERIOR PANELS / TRIM _0417664 FRONT DOOR WINDOW FRAME MOULDING A

EXTERIOR PANELS / TRIM  FRONT DOOR WINDOW FRAME MOULDING  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 75754A 1.INSTALL FRONT DOOR UPPER WINDOW FRAME MOULDING

a.

Engage the guide to temporarily install the front door upper window frame moulding to the door frame.

B566154


b.

Using an air riveter or hand riveter with a nose piece, install the front door upper window frame moulding with 6 new rivets.

HINT:

If the mandrel of the rivet does not come off on the first operation of the rivet gun, slide the rivet gun forward on the mandrel and operate it again.


NOTICE:
·
B125583C11
1.292,0.281 1.438,0.281 1.438,0.281 1.781,0.74 false 1.875,1.271 1.875,1.823 false 1.125,0.208 1.438,0.365 0.313,0.156 10 false *a 1.823,1.875 2.135,2.094 0.313,0.219 10 false *b 2.063,0.063 2.385,0.302 0.323,0.24 10 false *c
*a Riveter
*b Mandrel
*c Incorrect


Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.

·
B125584C10
1.438,0.448 1.156,0.448 false 1.458,1.417 1.219,1.417 false 1.479,0.365 1.802,0.604 0.323,0.24 10 false *a 2.198,0.125 2.51,0.365 0.313,0.24 10 false *b 2.052,1.146 2.365,1.385 0.313,0.24 10 false *b 1.531,1.313 1.854,1.552 0.323,0.24 10 false *a
*a Riveter
*b Incorrect


Confirm that the rivets are seated properly against the moulding.

·

Do not tilt the riveter when installing the rivet to the moulding.

·

Do not leave any space between the rivet head and moulding.

·
B125585C10
1.135,0.771 1.396,0.771 false 1.438,0.667 1.75,0.938 0.313,0.271 10 false *a 2.01,0.188 2.344,0.469 0.333,0.281 10 false *b
*a Riveter
*b Incorrect


Do not leave any space between the moulding and door frame. Firmly hold the 2 items together while installing the rivet.




Hide 75756D 2.INSTALL FRONT DOOR WINDOW FRAME MOULDING

HINT:

When installing a new front door window frame moulding, heat the vehicle body using a heat light.


Heating Temperature:
Item Temperature
Vehicle Body 20 to 30 °C (68 to 86 °F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts, touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the vehicle body excessively.


a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove any double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new front door window frame moulding.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the release paper from the front door window frame moulding.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



iii.
B566152C01
2.531,1.813 3.104,1.344 3.104,1.344 2.302,1.344 true 2.073,2.281 3.052,2.281 true 3.135,1.25 3.344,1.427 0.208,0.177 10 true *a 3.052,2.188 3.271,2.365 0.219,0.177 10 true *b
*a Double-sided Tape
*b Caulking Sponge


Engage the guide, clip and attach the double-sided tape and caulking sponge to install the front door window frame moulding.

HINT:

Press the front door window frame moulding firmly to install it.




Hide 67862 3.CONNECT FRONT DOOR WEATHERSTRIP

a.

Engage the 4 clips and connect the front door weatherstrip.


Hide 75720 4.INSTALL FRONT DOOR BELT MOULDING ASSEMBLY