Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR DOOR WINDOW FRAME MOULDING
RM37A0E _59 Vehicle Exterior _086903 EXTERIOR PANELS / TRIM _0417665 REAR DOOR WINDOW FRAME MOULDING A

EXTERIOR PANELS / TRIM  REAR DOOR WINDOW FRAME MOULDING  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 75764A 1.INSTALL REAR DOOR UPPER WINDOW FRAME MOULDING

a.

Engage the guide to temporarily install the rear door upper window frame moulding to the door frame.

B566162


b.

Using an air riveter or hand riveter with a nose piece, install the rear door upper window frame moulding with 5 new rivets.

HINT:

If the mandrel of the rivet does not come off on the first operation of the rivet gun, slide the rivet gun forward on the mandrel and operate it again.


NOTICE:
·
B125583C09
1.292,0.281 1.438,0.281 1.438,0.281 1.781,0.74 false 1.875,1.271 1.875,1.823 false 1.125,0.208 1.438,0.365 0.313,0.156 10 false *a 1.823,1.875 2.135,2.094 0.313,0.219 10 false *b 2.063,0.063 2.385,0.302 0.323,0.24 10 false *c
*a Riveter
*b Mandrel
*c Incorrect


Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.

·
B125584C09
1.438,0.448 1.156,0.448 false 1.458,1.417 1.219,1.417 false 1.479,0.365 1.802,0.604 0.323,0.24 10 false *a 2.198,0.125 2.51,0.365 0.313,0.24 10 false *b 2.052,1.146 2.365,1.385 0.313,0.24 10 false *b 1.531,1.313 1.854,1.552 0.323,0.24 10 false *a
*a Riveter
*b Incorrect


Confirm that the rivets are seated properly against the moulding.

·

Do not tilt the riveter when installing the rivet to the moulding.

·

Do not leave any space between the rivet head and moulding.

·
B125585C10
1.135,0.771 1.396,0.771 false 1.438,0.667 1.75,0.938 0.313,0.271 10 false *a 2.01,0.188 2.344,0.469 0.333,0.281 10 false *b
*a Riveter
*b Incorrect


Do not leave any space between the moulding and door frame. Firmly hold the 2 items together while installing the rivet.




Hide 75766B 2.INSTALL REAR DOOR REAR WINDOW FRAME MOULDING

HINT:

When installing a new rear door rear window frame moulding, heat the vehicle body using a heat light.


Heating Temperature:
Item Temperature
Vehicle Body 20 to 30 °C (68 to 86 °F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts, touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the vehicle body excessively.


a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove any double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new rear door rear window frame moulding.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the release paper from the rear door rear window frame moulding.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



iii.
B566160C01
1.688,1.656 0.427,1.479 0.427,1.479 1.813,1.479 true 1.896,2.25 2.979,2.25 true 0.25,1.385 0.563,1.542 0.313,0.156 10 false *a 3.01,2.167 3.323,2.323 0.313,0.156 10 false *b
*a Double-sided Tape
*b Caulking Sponge


Engage the guide, clip and attach the double-sided tape and caulking sponge to install the rear door rear window frame moulding.

HINT:

Press the rear door rear window frame moulding firmly to install it.




Hide 75762B 3.INSTALL REAR DOOR FRONT WINDOW FRAME MOULDING

HINT:

When installing a new rear door front window frame moulding, heat the vehicle body using a heat light.


Heating Temperature:
Item Temperature
Vehicle Body 20 to 30 °C (68 to 86 °F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts, touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the vehicle body excessively.


a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove any double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new rear door front window frame moulding.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the release paper from the rear door front window frame moulding.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



iii.
B566158C01
1.167,1.302 0.302,1.125 0.302,1.125 1.615,1.125 true 0.292,2.365 1.406,2.365 true 0.094,1.042 0.406,1.198 0.313,0.156 10 false *a 0.115,2.271 0.427,2.427 0.313,0.156 10 false *b
*a Double-sided Tape
*b Caulking Sponge


Engage the guide, clip and attach the double-sided tape and caulking sponge to install the rear door front window frame moulding.

HINT:

Press the rear door front window frame moulding firmly to install it.




Hide 67872 4.CONNECT REAR DOOR WEATHERSTRIP

a.

Engage the 5 clips and connect the rear door weatherstrip.


Hide 75740 5.INSTALL REAR DOOR BELT MOULDING ASSEMBLY