Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › QUARTER PANEL WHEEL OPENING MOULDING
RM37A0E _59 Vehicle Exterior _086903 EXTERIOR PANELS / TRIM _0417672 QUARTER PANEL WHEEL OPENING MOULDING A

EXTERIOR PANELS / TRIM  QUARTER PANEL WHEEL OPENING MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 58588B 1.REMOVE REAR WHEEL HOUSE PAD

Hide 61668C 2.REMOVE NO. 2 QUARTER PANEL SEAL

HINT:

When removing the No. 2 quarter panel seal, heat the vehicle body and No. 2 quarter panel seal using a heat light.


Heating Temperature:
Item Temperature
No. 2 Quarter Panel Seal and Vehicle Body 40 to 60°C (104 to 140°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts, touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the vehicle body and No. 2 quarter panel seal excessively.


a.
B565091

Remove the 3 screws.


b.

Using a heat light, heat the vehicle body and No. 2 quarter panel seal.


c.
B565092C01
0.719,0.656 1.344,0.656 true 0.51,0.563 0.708,0.75 0.198,0.188 10 false *a
*a Double-sided Tape


Separate the double-sided tape to remove the No. 2 quarter panel seal.