Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM › 2020.02–2020.11
RM37A0E _58 Vehicle Interior _086884 DOOR LOCK _0417738 POWER DOOR LOCK CONTROL SYSTEM L

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  PRECAUTION  


PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL


NOTICE:

When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following systems after the cable is reconnected.

System Name See Procedure
Lane Control System (Click here)
Parking Support Brake System
Pre-collision System
Parking Assist Monitor System
Panoramic View Monitor System
Power Door Lock Control System
Power Back Door System



PRECAUTION FOR REGISTRATION


a.

Before replacing the main body ECU (multiplex network body ECU), refer to Service Bulletin.



PRECAUTIONS FOR INSPECTING POWER SOURCE FOR MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (w/ Door Control Battery)


a.

The auxiliary battery supplies power to the main body ECU (multiplex network body ECU) via the door control battery. If a main body ECU (multiplex network body ECU) power source malfunction occurs, the door control battery may be malfunctioning.


b.

If the ECU-DCC NO. 2 fuse (the main power source fuse of the main body ECU (multiplex network body ECU)) is removed with the door control battery charged, power will be supplied to the main body ECU (multiplex network body ECU) from the door control battery for up to 50 minutes. At this time, the main body ECU (multiplex network body ECU) will be able to function with the ECU-DCC NO. 2 fuse (the main power source fuse of the main body ECU (multiplex network body ECU)) removed.